Instrukcja obsługi Elan Imbuia 83227
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elan Imbuia 83227 (16 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.7 gwiazdek
Strona 1/16
Français p. 9
MODEL #83227
SEMI-FLUSH
1
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
PACKAGE CONTENTS
2
A 13 Inch Hanging Ball 1
9 Inch Hanging Ball 3
8 Inch Hanging Ball 7
10 Inch Hanging Ball 7
Canopy 1
Wire Loop 18
40-Watt G9 bulb 3
Bulb Cover 3
Hanging Clip 18
Threaded Socket 3
B
C
D
E
F
G
H
I
J
PART DESCRIPTION QUANTITY
D
C
B
A
H
I
F
J
G
E
Note: The hanging balls are located in the bottom
compartment of the styrofoam container.
3
HARDWARE CONTENTS
CAUTION
• Read and understand all instructions and illustrations completely before proceeding with assembly
and installation of this fixture.
• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate
completely, please contact a licensed electrical contractor.
• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts
out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate
the ETL listing and/or C.S.A. certification of this fixture.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses, drill and 9/32 drill bit.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• IMPORTANT: NEVER attempt any work without shutting off the electricity.
• Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the “OFF”
position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power
to the fixture or room that you are working on.
• Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,
place it in the "OFF" position.
• Do not use bulbs with wattage greater than specified on this fixture.
• WARNING: California Prop. 65: This lighting fixture contains chemicals known to the state of California
to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.
Short
Machine
Screws
BB
Mounting
Bracket
Ground
Screw
DD EE
Threaded
Knobs
FF
Long
Machine
Screws
CC
Qty: 2
Qty: 2
Qty: 1
Qty: 1
Wire
Connectors
AA
Qty: 3
Qty: 2
GND
Specyfikacje produktu
| Marka: | Elan |
| Kategoria: | Ulga |
| Model: | Imbuia 83227 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Elan Imbuia 83227, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ulga Elan
10 Stycznia 2025
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
12 Grudnia 2024
Instrukcje Ulga
- Ulga Karma
- Ulga Silverstone
- Ulga Dydell
- Ulga Hinkley Lighting
- Ulga Vimar
- Ulga Light4Me
- Ulga Shada
- Ulga Porter-Cable
- Ulga Sagitter
- Ulga Workzone
- Ulga Schwaiger
- Ulga Atmospheres
- Ulga 9.solutions
- Ulga Meteor
- Ulga OneConcept
Najnowsze instrukcje dla Ulga
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025