Instrukcja obsługi Eliminator Lighting Stealth Craze


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eliminator Lighting Stealth Craze (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 39 osób i została oceniona przez 20 użytkowników na średnio 3.9 gwiazdek

Strona 1/6
STEALTH CRAZE
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Introduction:
The Stealth Craze is a unique DMX intelligent moving head unit. The Stealth Craze has 3 operating
modes; sound active mode, show mode, or controlled via DMX controller. The Stealth Craze has 2
DMX Channel modes; 5 or 16 channels. The unit can be run as a stand alone unit or in a Master/
Slave set up. This unit has been tested and there is no assembly required. Follow the instructions
on the following pages to operate your fixture. To enhance the beams effects you can use a fog
machine.
CAUTION! Please read and understand these instructions before installing or operating this unit.
SPECIFICATIONS:
Model: Stealth Craze
Supply Voltage: 100V-240V 50/60Hz
LED: 4 x 10W White LED’s
Weight: 10lbs./ 4.5 kgs.
Size: 6.69” (L) x 9.4” (W) x 12.63” (H)
Fuse: 2 Amp
Power Consumption: 55W
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 2 DMX Channel Modes:
5 Channel Mode &
16 Channel Mode
Colors: 3 Colors + White
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Fuse Replacement: Locate and remove
the unit’s power cord. Once the cord
has been removed, the fuse holder is
located inside the power socket. Insert
a flat-head screw driver into the fuse
holder and gently pry out the holder.
Remove the bad fuse and replace with
a new one. The fuse holder has a built-in
second holder for a spare fuse.


Specyfikacje produktu

Marka: Eliminator Lighting
Kategoria: Niesklasyfikowane
Model: Stealth Craze

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Eliminator Lighting Stealth Craze, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą