Instrukcja obsługi Eliminator Lighting Stealth Spot


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eliminator Lighting Stealth Spot (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.4 gwiazdek

Strona 1/6
STEALTH SPOT
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Introduction:
The Stealth Beam is a DMX intelligent moving head unit. The Stealth Beam has 3 operating modes;
sound active mode, show mode, or controlled via DMX controller. The Stealth Beam has 2 DMX
Channel modes; 5 or 15 channels. The unit can be run as a stand alone unit or in a Master/Slave set
up. This unit has been tested and there is no assembly required. Follow the instructions on the fol-
lowing pages to operate your fixture. To enhance the beams effects you can use a fog machine.
CAUTION! Please read and understand these instructions before installing or operating this unit.
SPECIFICATIONS:
Model: Stealth Spot
Supply Voltage: 100V-240V 50/60Hz
LED: 1 x 60W White LED
Weight: 11lbs./ 5 kgs.
Size: 6.7” (L) x 9.4” (W) x 13.97” (H)
Fuse: 2 Amp
Power Consumption: 90W
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 2 DMX Channel Modes:
5 Channel Mode &
15 Channel Mode
Gobos: 5 + Spot
Colors: 7 Colors + White
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Fuse Replacement: Locate and remove
the unit’s power cord. Once the cord
has been removed, the fuse holder is
located inside the power socket. Insert
a flat-head screw driver into the fuse
holder and gently pry out the holder.
Remove the bad fuse and replace with
a new one. The fuse holder has a built-in
second holder for a spare fuse.


Specyfikacje produktu

Marka: Eliminator Lighting
Kategoria: Niesklasyfikowane
Model: Stealth Spot

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Eliminator Lighting Stealth Spot, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą