Instrukcja obsługi Emko CHANNEL8N
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emko CHANNEL8N (4 stron) w kategorii termostat. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.3 gwiazdek
Strona 1/4
ENG CHANNEL8N 01 V00 03/17
CHANNEL8N
8 CHANNEL PT-100 SCANNER
96 x 96 DIN 1/4
96 mm / 3.78 inch
96 mm / 3.78 inch
12 ± 1 mm / 0.47 inch 84 mm / 3.31 inch
15 0.59 inchmm /
92mm/3.62 inch
92mm/3.62 inch
129mm/5.08 inch(min)
129mm/5.08 inch(min)
320 x 240 Pixel
TFT LCD
Standart
Function
Buttons
MENU BUTTON
Used to access Menu page.
ENTER BUTTON
Used to go in to selected page, to make parameter's cell
available to change and to confirm parameter’s change.
AUTO BUTTON
Used to auto-scan pages.
BACK BUTTON
Used to go back to previous menu and to cancel
parameter's change.
UP BUTTON
Used to go up in menus and lists and also used to increase
parameter's value.
LEFT BUTTON
Used to go left in menus.
F1 F2 F3 F4
F4F1 F2 F3
DOWN BUTTON
Used to go downin menus and lists and also used to
decrease parameter's value.
RIGHT BUTTON
Used to go right in menus.
F4
1F F2 3F
DELETE BUTTON
Used to erase logs on the screen.
SETTINGS
LOGS
ADVANCE
SETTINGS
LANGUAGE
CHANNEL8N 8 Channel PT-100 Scanner
- 320 x 240 pixel TFT LCD display
- 8 PT-100 temperature sensor inputs
- ON-OFF control
- Relay or (pnp “source”) transistor output
- Sensor error detection
- Adjustable temperature offset
- 3 Different alarm and pre-alarm types for each channel
(High, Low and Band Alarms)
- User defined channel labels
- Display scan modes
- Operating with Real Time Clock (RTC)
- ModBus RTU communication protocol
(RS-232, RS-485 and Ethernet communication)
- Data Logging to USB Flash Memory
- Adjustable data logging time interval
- Password protection for programming mode
CHANNEL8N series 8 channel PT100 scanner devices are designed for
measuring and logging temperature. They can be used in many
applications with their PT-100 process input, alarm outputs, selectable
alarm functions, RS-232 / RS-485 / Ethernet / USB communications.
SPECIFICATIONS
INPUT
Thermoresistance(RTD) : 2 wire PT100 (IEC 751) (ITS90)
Measurement Range : -200°C / +650°C
Accuracy : ± 0.25% of full scale
Sensor Break Protection : Upscale
W
OUTPUT
Relay :
ax. 1A@24V
DISPLAY
LCD Display : 320x240
POWER SUPPLY
ENVIRONMENTAL RATINGS
Operating Temperature : 0...50°C
Humidity : 0-90%RH (none condensing)
Protection Class : IP65 at front, IP20 at rear
PHYSICAL SPECIFICATIONS
Weight : 400 gr.
Dimension : 96 x 96 mm, Depth:96 mm
Panel Cut-Out : 92 x 92 mm
Sampling Time : 400msecs.
Line Compensation : Maximum 10
Input Ressistance : > 10MW
Resistive Load 5A@250V
(Electrical Life : 100.000 operation (Full Load)
Transistor : PNP(source) type transistor output (M )
pixel TFT LCD
100 - 240 V (-%15 / +%10) 50/60 Hz. 7VA
24 V (-%15 / +%10) 50/60 Hz. 7VA
24 V (-%15 / +%10) 7W
(It must be determined in order.)
Electrical Wiring Diagram
Device with Relay Outputs
RS 232
COMMUNICATION
5 x 5A@250V
COMMON-1
COMMON-2
16 21 22 23 24 25 26 27 28 29 3017 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CH-1 ALARM
OUTPUT
CH-2 ALARM
OUTPUT
CH-3 ALARM
OUTPUT
CH-4 ALARM
OUTPUT
CH-5 ALARM
OUTPUT
CH-6 ALARM
OUTPUT
CH-7 ALARM
OUTPUT
CH-8 ALARM
OUTPUT
GENERAL ALR.
OUTPUT
GENERAL PRE-ALR.
OUTPUT
5 x 5A@250V
USB 2.0
COMMUNICATION
ETHERNET
OR
RS485
COMMUNICATION
PT-100
CH-1
PT-100
PT-100
PT-100
PT-100
PT-100
PT-100
PT-100
CH-2CH-3CH-4CH-5CH-6CH-7CH-8
AGND
100...240V - %15;+%10) 50/60Hz 7VA
24V (-%15;+%10) 50/60Hz 7VA
24V (-%15;+%10) 7W
L
(+)
N
(-)
Device with Transistor Outputs
RS 232
COMMUNICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
USB 2.0
COMMUNICATION
ETHERNET
OR
RS485
COMMUNICATION
PT-100
CH-1
PT-100
PT-100
PT-100
PT-100
PT-100
PT-100
PT-100
CH-2CH-3CH-4CH-5CH-6CH-7CH-8
AGND
100...240V (- %15;+%10) 50/60Hz 7VA
24V (-%15;+%10) 50/60Hz 7VA
24V (-%15;+%10) 7W
L
(+)
N
(-)
i
i
i
i
iRS485, Ethernet and USB communications are optional
16 21 22 23 24 25 26 27 28 29 3017 18 19 20
CH-1 ALARM
OUTPUT
CH-2 ALARM
OUTPUT
CH-3 ALARM
OUTPUT
CH-4 ALARM
OUTPUT
CH-5 ALARM
OUTPUT
CH-6 ALARM
OUTPUT
CH-7 ALARM
OUTPUT
CH-8 ALARM
OUTPUT
GENERAL ALR.
OUTPUT
GENEAL PRE- ALR.
OUTPUT
10 x 1A@24V
TRANSISTOR OUTPUTS
POWER SUPPLY
24V ±%15
i
i
i
i
iRS485, Ethernet and USB communications are optional
Relay Outputs
(Alarm Outputs for
Channels 6 to 8,
General Alarm Output and
General Pre-Alarm Output )
CH = CHANNEL
Power Supply Input
(It must be determined in order.)
Process Inputs
(PT-100)
Common1 Common2
Relay Outputs
(Alarm Outputs for
Channels 1 to 5)
Power Supply Input
(It must be determined in order.)
Process Inputs
(PT-100)
Transistor Outputs
(Alarm Outputs for
Channels 1 to 8,
General Alarm Output and
General Pre-Alarm Output )
CH = CHANNEL
Maximum
CHANNEL8N Front View and Dimensions of
Panel Cut-Out
1-Before mounting the device
in your panel, make sure that
the cut-out is of the right size.
2-Check front panel gasket
position
3-Insert the device through the
cut-out. If the mounting clamps
are on the unit, put out them
before inserting the unit to the
panel.
Panel Mounting
Installation Fixing Clamp
The unit is designed for panel
mounting.
1-Insert the unit in the panel
cut-out from the front side.
2- Insert the mounting clamps
to the holes that located top
and bottom sides of device and
screw up the fixing screws until
the unit completely immobile
within the panel.
1
2
3
F1 F2 F3 F4
1
2
F1 F2 F3 4F
Removing from the Panel
1-Loosen the screws.
2-Pull mounting clamps from
top and bottom fixing sockets.
3-Pull the unit through the
front side of the panel
Definition of Front Panel
3
1
2
F1 F2 F3 4
F
Specyfikacje produktu
| Marka: | Emko |
| Kategoria: | termostat |
| Model: | CHANNEL8N |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Emko CHANNEL8N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje termostat Emko
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
12 Września 2024
21 Sierpnia 2024
Instrukcje termostat
- Carel
- Siemens
- Eqiva
- Mikoterm
- Conrad
- Braeburn
- Nest
- Thermy
- Coati
- Jumo
- Amfra
- Hive
- Corbero
- Ouellet
- Vemer
Najnowsze instrukcje dla termostat
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
6 Kwietnia 2025
6 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025