Instrukcja obsługi Epson Pro Cinema EH-QB1000B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Epson Pro Cinema EH-QB1000B (4 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 12.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User’s Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or bottom of the screen and is centered horizontally. If this isn’t possible, use the
lens shift feature to reposition the image (see “Adjust the image”).
See the online User’s Guide for more information on where to place your
projector.
Connect the projector
Connect multiple video devices and use the buttons on the remote Source
control or the button on the projector to switch between them. For Source
additional connection types, see the online User’s Guide.
HDMI
TM
cable
Power supply
USB cable
Streaming
device
Note:
• When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high
speed).
• You can output audio to an external sound system that supports
using the HDMI
™
2 (eARC/ARC) port.
• If you are connecting an optical HDMI cable that has a power supply USB cable,
you must also connect the cable’s USB power connector to the Opt.HDMI
™
(300mA) port.
Wired network
Connect the projector to your network using an Ethernet cable. See “Wired
network configuration” for more information.
Ethernet cable
Turn on your equipment
1
Plug in the projector.
2
Press the power button on the projector or the button on the On
remote control. The shutter opens and the power light flashes blue,
then stays on.
Note: To shut down the projector, press the power button on the
projector or the button on the remote control, then press the Standby
button again to confirm, if necessary. Wait for cooldown to complete
before unplugging the projector.
3
Use the arrow and Enter buttons on the remote control to select the focus,
image orientation, and language settings.
Note: To change these settings, see the online User’s Guide.
4
Turn on your video source.
5
If you don’t see an image, press one of the Source buttons on the remote
control to select the image source.
Note: If you still see a blank screen or have other display problems, see the
troubleshooting tips on this sheet.
Using the remote control
Install the batteries as shown (two AA batteries).
Choose which source to
display
Turn projector on
Access projector menus
Adjust zoom, focus,
and lens shift
Turn off projector
display
Navigate projector
menus
Turn projector off
Control connected
sources with HDMI
Link
For more information on using the remote control, see the online User’s Guide.
EH-QB1000B/EH-QB1000W
Specyfikacje produktu
| Marka: | Epson |
| Kategoria: | Projektor |
| Model: | Pro Cinema EH-QB1000B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Epson Pro Cinema EH-QB1000B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Projektor Epson
1 Marca 2025
12 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
23 Grudnia 2024
Instrukcje Projektor
- Showtec
- Marantz
- Bauer
- Dream Vision
- XGIMI
- KickAss
- Salora
- Smart Tech
- Vankyo
- RCA
- JVC
- Xiaomi
- AOpen
- Elite Screens
- Medion
Najnowsze instrukcje dla Projektor
9 Kwietnia 2025
9 Kwietnia 2025
2 Kwietnia 2025
5 Marca 2025
5 Marca 2025
3 Marca 2025
26 Lutego 2025
20 Lutego 2025
20 Lutego 2025
20 Lutego 2025