Instrukcja obsługi Equip USB 2.0 Multi-Frontpanel 3.5"
Equip
Czytnik kart pamięci
USB 2.0 Multi-Frontpanel 3.5"
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Equip USB 2.0 Multi-Frontpanel 3.5" (4 stron) w kategorii Czytnik kart pamięci. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
Manual
www.equip-info.net
3.5" Multi Front Panel + Cardreader 50plus
english
Manual_Page 2
www.equip-info.net
Important Note:
We suggest that you read the following steps carefully in advance in order to fully under-
stand the installation method of this equipment for obtaining maximum efficiency.
Package Contents
1. 3.5” Multi Front Panel
2. Setup CD
3. Slot bracket
4. Octopus cable for FireWire, USB and SATA connection
5. SATA connection cable
6. Y-cable with 2x audio plug
7. USB connection cable
8. Set of screws
Driver and Hardware Installation
For Windows Vista/XP/2000/ME system, drivers are all provided by the operating
systems, no additional driver needed. The card reader will be recognized by OS
automatically once it is connected.
Driver Installation for Windows 98
Follow the installation guide below to complete the driver installation.
1. Insert Setup CD, and double click “AM-Reader-98Drv-Setup”
2. Click “Next” on the welcome page of “InstallShield Wizard”
3. Click “finish” to complete the installation
You will see four removable disk icons of the all-in-1 card reader on the explorer window
once you connect your card reader to the PC. The disk drive letters are determined by the
PC’s configuration which may varies.
Note: The driver installation above is designed for Windows 98 only.
Manual_Page 3
www.equip-info.net
Driver Installation for Mac OS 9.x
1. Decompress driver binary file in your CD, it will create two driver files in
specific directory.
2. Copy these two files into Mac OS 9.x system extension directory.
3. Reboot your system.
4. Plug your card reader on USB, and use it.
Hardware Installation
Please connect the cables to the panel body as shown in picture 1.
There are three cables need to be connected to the panel body.
The white 4-pin connector on the left should connect with the 4-pin connector
of the USB connection cable ( attention: this connector has been particularly
designed and can be connected only in the proper way).
The 16-pin connector in the middle should connect with the 16-pin connector of
the 0ctopus cable for FireWire, USB and SATA connection ( attention: the side
with a key should be connected upwards, as shown in the picture 2).
The left 5-pin connector should connect with the 5-pin connector of the Y-cable
with 2x audio plug ( attention: this connector has been particularly designed
and can be connected only in the proper way).
The red SATA cable is already fixed on the panel body.
Fixing the Panel Body:
Now the wire connection of the whole set is completed, slide the extension cables
and the panel body into any open external 3.5” disk driver slot, and use the
enclosed screws to fasten it.
Connect extension ports to the correspondent ports.
1. Connect the USB, FireWire1394a and audio extension ports as shown in picture 3
(audio extension ports should connect to the audio-in ports (MIC & SPK) located
on the back side according to their colors)
Picture 1
Picture 2
Picture 3
Specyfikacje produktu
| Marka: | Equip |
| Kategoria: | Czytnik kart pamięci |
| Model: | USB 2.0 Multi-Frontpanel 3.5" |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Equip USB 2.0 Multi-Frontpanel 3.5", zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Czytnik kart pamięci Equip
26 Września 2024
26 Września 2024
26 Września 2024
Instrukcje Czytnik kart pamięci
- Czytnik kart pamięci Speed-Link
- Czytnik kart pamięci Revoltec
- Czytnik kart pamięci Sandberg
- Czytnik kart pamięci Approx
- Czytnik kart pamięci Act
- Czytnik kart pamięci Iogear
- Czytnik kart pamięci Hama
- Czytnik kart pamięci Raidsonic
- Czytnik kart pamięci Vimar
- Czytnik kart pamięci Trust
- Czytnik kart pamięci NZXT
- Czytnik kart pamięci I-TEC
- Czytnik kart pamięci D-Link
- Czytnik kart pamięci Conceptronic
- Czytnik kart pamięci SIIG
Najnowsze instrukcje dla Czytnik kart pamięci
1 Marca 2025
27 Lutego 2025
27 Lutego 2025
20 Lutego 2025
12 Lutego 2025
26 Grudnia 2024
14 Grudnia 2024
9 Października 2024
9 Października 2024
8 Października 2024