Instrukcja obsługi Extech RH200W
Extech
Niesklasyfikowane
RH200W
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech RH200W (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
© All rights reserved. Page 1 RH200W- -GB_v1.1 /17 2017 FLIR Systems, Inc. www.extech.com en 10
USER MANUAL for MODEL RH200W
Wireless Hygro-Thermometer
Thank you for selecng the Extech RH200W Wireless Hygro-Thermometer with
Self-Calibraon & Auto Night Light. This device is shipped fully tested and
calibrated and, with proper use, will provide years of reliable service. Please
visit our website ( ) to check for the latest version of this User www.extech.com
Manual, Product Updates, and Customer Support.
DESCRIPTIONS
MAIN UNIT
1. Backlight key
In normal mode, short press for 5 seconds
of backlighng Pressing other keys will reset the .
5-second mer
2. OUT (CHANNEL) / + key
In calibraon mode, short press to increase the
value
In normal mode, short press to switch between
INDOOR, Channel 1~8
In normal mode, long press to enter
auto-cycle (Channel 1~8 and INDOOR
readings will alternately display at 4-
second intervals and the icon will
display). From -cycle mode, short auto
press to return to normal mode.
3. M (MODE) key
In calibraon mode, short press for
opons.
In calibraon mode, long press to clear data
4. MIN-MAX - key/
In calibraon mode, short press to decrease value
In normal mode, short press to check maximum/minimum temperature and
humidity records. Short press to return to normal mode
With MAX or MIN displayed, long press to reset the displayed values
5. CAL key
In normal mode, long press to enter calibraon mode
In calibraon mode, long press to return to normal mode
6. Auto night-light switch
Slide to ON posion to acvate night-light (the light will automacally turn
on in dark areas). The brightness is weaker than normal backlight. Slide to
OFF posion to turn o the night-light funcon
7. °C / °F key - Short press to toggle temperature units °C/°F
8. SENSOR key
In normal mode, short press to acvate the receiver for the current channel.
The unit will receive signals for 5 minutes
9. RESET key
Short press for a factory default reset. Perform a reset if the display freezes
or the unit otherwise malfuncons.
WIRELESS SENSOR
1. Transmission status LED lashes (f
when sensor is transming)
2. Wall mount
3. CHANNEL slide switch (assign
sensor to Channel 1 ~ 8)
4. RESET key (short press to reset
the sensor)
5. Baery compartment (2 x AA
baeries)
OPERATION
POWERING THE WIRELESS SENSOR
1. Remove the baery door of the sensor
2. Insert 2 ‘AA’ baeries, observing correct polarity
3. Close the baery door
Notes: Once a sensor is assigned a channel using the channel slide switch, you
can only -assign a channel by removing the baeries or reseng the unit. re
Avoid placing the sensor in direct sunlight or inclement weather.
POWERING THE MAIN UNIT
1. Remove the baery door of the main unit
2. Install 4 baeries observing correct polarity then use a paper clip to ‘AA’;
press the key RESET
3. Close the baery door
4. All LCD segments will switch on
Note: To avoid a pairing failure, power up the sensor rst, and then press the
RESET key on the main unit only.
INDOOR TEMPERATURE/RELATIVE HUMIDITY
1. Short press OUT unl ‘IN” is displayed. The unit is now displaying indoor
temperature °C / °F and Relave Humidity %.
2. Short press to switch between °C and °C / °F °F
3. When the temperature is <-40°F/°C or > 158°F (70°C), will be Lo or HI
displayed respecvely. The humidity display will show dashes:
4. When the humidity is < 1% or > 99%, or will be displayed: Lo HI
COMFORT INDICATION
The comfort indicaon feature is an icon-based system showing comfort level
based on indoor air temperature and humidity ranging from Excessive Cold (le
icon below) to Comfortable (center icon) to Excessive Heat (right icon).
Note: Comfort indicaon can vary even when measuring the same
temperature because of the strong eect humidity has on comfort. There is no
comfort indicaon when temperature is < 0°C (32°F) or > 60°C (140°F).
TEMPERATURE HUMIDITY TRENDING ARROWS AND
The temperature and humidity trend indicator illustrates the temperature and
humidity change over me. Arrows indicate rising (le icon shown below),
steady (center icon), falling temperatures (right icon). or
MAX/MIN RECORDING
View the MAX/MIN temperature and humidity readings since the last reset.
1. In normal mode, short pre to show the current maximum ss MIN-MAX
temperature and humidity values (diagram on le below); press again to
show the minimum values (diagram in center); press again to exit the mode
(the unit automacally exits the mode aer approximately 5 seconds).
2. Perform a manual reset (clear MAX/MIN readings) by long pressing MIN-
MAX when the unit is displaying the MAX/MIN records (diagram on right).
Specyfikacje produktu
| Marka: | Extech |
| Kategoria: | Niesklasyfikowane |
| Model: | RH200W |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Extech RH200W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Extech
8 Stycznia 2025
3 Października 2024
3 Października 2024
3 Października 2024
29 Września 2024
29 Września 2024
27 Września 2024
19 Września 2024
18 Września 2024
13 Września 2024
Instrukcje Niesklasyfikowane
- Selleys
- Makita
- Lastolite
- Osram
- Gree
- Line 6
- Piet Boon
- Growatt
- Tuur
- Gasmate
- Luminex
- Markbass
- Kostal
- Essenza
- Artrom
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025