Instrukcja obsługi Ferguson FS2SD

Ferguson czujnik dymu FS2SD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ferguson FS2SD (2 stron) w kategorii czujnik dymu. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

5 6

7 8

Smoke Detector

User Manul

*Please read the user manual carefully before operation.

FS2SD

Product introduction

This product is a photoelectric smoke Detector. It is

a warning device, cannot sense gas, heat, or flame,

cannot prevent or put out fire. It is capable of

real-time detecting the presence of smoke,

detection of visible particles (smoldering fire) faster

than ionization smoke alarms. Red LED flashes

rapidly and detectors sound alarm once detecting

smoke fire danger, can alert you and your family

timely. Smoke alarms should be installed in all

rooms, living room, storage areas, basements and

attics unit where fire may happen.

Specyfication

Sensor

Bracket

Tips

1.This device is designed specifically for home use, may not to

able to provide sufficient fire alert for public areas.

2.Please avoid installation in bathrooms and other very humid

places, dusty or greasy areas, or very airy place with air

conditioning, ceiling fans, etc.

3.Please keep device clean, and do not let dust to accumulate. It

is recommended to clean every 6 months with a household

cleaner and a soft brush.

4.The effective lifespan is 10 years. Replacement every 10 years,

regardless of breakdown or not.

5.Please pay attention if it alarms. Besides proper use of alarm,

we should also strengthen the consciousness of fire safety.

Test/Hush Button

and LED indicator

●

Ceiling mounting

●

Sloping ceiling mounting

Recommended and Avoided

Instalation Position

Sloping Ceiling Mounting

Position

Instalation Renderings

Area that air does not flow

Ceiling Centre

The preferred location to install smoke alarm is in the centre of the ceiling

because Smoke, heat and combustion products rise to the ceiling and

will lateral spread. Keep at least 30 cm distance from lights or

decorations, and at least 15 cm away from walls and corner. If hall is

more than 12 meters wide, please install at 2 sides of the hall.

If ceiling is sloping, please install the smoke alarm at horizontal distance

90cm away from the ceiling top.

Anticlockwise rotating the bracket out from the installation

base, then remove the battery insulating strip to make

device on power.

Remove the double-sided adhesive membrane on the

mounting bracket, and rotating the smoke alarm into

the bracket.

1. Operating voltage: DC3V(CR123A Lithium Battery)

2. Static current: ≤ 10µ A

3. Alarm current: ≤ 60mA

4. Sound level: 85dB/3m

5. Working Temperature: -10 ~+50

°C

6. Working humidity: ≤ 95%RH

7. Dimension: 60*60*49.2mm

Select the Smart Hub from the list of devices to which you want to

add a new device (sensor) or device with factory settings restored.

1.Click add devices on APP, entering networking mode.

Adding device

When the LED in the control

panel blinks blue, we confirm

and go to pairing devices.

2. According to the tips on APP, keep pressing networking

button, green LED flashes quickly, tips appear on APP,

green LED keep on for 3 seconds, network success.

Delete device

In the application, click and hold the selected device, the "delete

device" command will be displayed. After removed it, disconnect

the network connection device by pressing and holding the pairing

button. 6-fold LED blink in green means disconnection of the

sensor network from the HUB.

Specyfikacje produktu

Marka:	Ferguson
Kategoria:	czujnik dymu
Model:	FS2SD
Kolor produktu:	Chrom
Moc:	270 W
Typ wyświetlacza:	Tak
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
Typ filtra wody:	Bezpośredni przepływ
Pojemność przefiltrowanej wody:	600 l
Wymienialny kartridż:	Tak
Minimalne ciśnienie wody (wkładu):	2 bar