Instrukcja obsługi Ferplast Daytona Matic Gm
Ferplast
Niesklasyfikowane
Daytona Matic Gm
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ferplast Daytona Matic Gm (30 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/30

MAX Kg - 60 132 lbs
M L XL
AUTOMATIC
MAGNETIC
CLOSING
HOOK
AUTOMATIC

UK - Ferplast has created the first automatic hook
for dog leashes. It combines maximum safety
and easiness of use, making hooking/unhooking faster
and easier to the collar or harness by means of a magnetic
mechanism. Made of techno-plastic, it’s sturdy and light
at the same time. Available in 2 different sizes, its ensure
resistance to traction of up to 120 kg (264 lbs) for the Me-
dium model, and 180Kg (397 lbs) for the Large, thanks also
to the steel pins included. Its double-button opening sys-
tem makes it extremely safe, preventing it from unhooking
accidentally.
Directions:
1) Open the hook by pressing the two buttons at the
same time.
2) Move the hook close to the ring in the collar/ harness to
activate the automatic closure of the hook.
3) To unhook the collar/ harness, press the two buttons at
the same time again.
WARNINGS:
• Check the hook periodically to make sure all its parts are
intact. If damage of any kind is detected, replace the entire
product.
• Check the quality and solidity of the collar/ harness where
the hook is attached.

• Clean the hook periodically; if particularly dirty,
its automatic closure may be compromised.
Rinse it under running water and remove any remaining
dirt with a toothpick or a soft toothbrush. Dry immediately
with a soft cloth.
• As the hook is magnetic, it must be kept away from
electronic or magnetic devices, such as cell phones, cred-
it cards and any other magnetic cards, and, in particular,
medical devices.
• The hook only works automatically with iron-made rings.
If the ring is made of other materials, such as aluminium,
use the hook in manual mode.
• The hook works with round-section rings with a diameter
equal to or inferior to the maximum rated value. Do not
connect it to other kinds of rings.
• This product is intended for use with pets only. Not a child
toy.
• The model of leash, and therefore of its relative hook,
must be suitable for the size of the animal (always respect
the maximum allowed dog weight).
• Never leave your pet unattended when using the prod-
uct.
• Never attach more than one ring to the hook.
Specyfikacje produktu
Marka: | Ferplast |
Kategoria: | Niesklasyfikowane |
Model: | Daytona Matic Gm |
Kolor produktu: | Biały |
Typ produktu: | Projektor o standardowym rzucie |
Źródło zasilania: | Prąd przemienny |
Automatyczne wyłączanie zasilania: | Tak |
Częstotliwość wejściowa AC: | 50-60 Hz |
Napięcie wejściowe AC: | 100-240 V |
Wysokość produktu: | 95 mm |
Szerokość produktu: | 283 mm |
Głębokość produktu: | 222 mm |
Waga produktu: | 1900 g |
W zestawie pilot zdalnego sterowania: | Tak |
Podręcznik użytkownika: | Tak |
Poziom hałasu: | 33 dB |
Zasięg obiektywu: | 2.59 - 2.87 |
Ilość portów Ethernet LAN (RJ-45): | 1 |
Umieszczenie: | Komputer stacjonarny |
Zakres temperatur (eksploatacja): | 0 - 40 °C |
Zakres wilgotności względnej: | 10 - 90 % |
Współczynnik kontrastu (typowy): | 13000:1 |
Natywne proporcje obrazu: | 16:10 |
Możliwość przybliżenia: | Tak |
Wi-Fi: | Nie |
Skrócona instrukcja obsługi: | Tak |
Przewody: | AC,VGA |
Pobór mocy w trybie czuwania: | 0.5 W |
Przewodowa sieć LAN: | Tak |
Zintegrowany czytnik kart: | Nie |
Kompatybilność 3D: | Tak |
Pobór mocy: | 265 W |
Karta gwarancyjna: | Tak |
Ilość portów HDMI: | 1 |
Port RS-232: | 1 |
Baterie w zestawie: | Tak |
Pozycjonowanie na rynku: | Biznes |
Liczba portów VGA (D-Sub): | 3 |
Wyście mocy ac: | Tak |
Dopuszczalna wysokość podczas eksploatacji (n.p.m.): | 0 - 1499 m |
Długość ogniskowa: | 16.88 - 21.88 mm |
Zasięg skanowania w poziomie: | 15 - 102 kHz |
Zasięg skanowania (długość): | 23 - 120 Hz |
Obsługiwane rozdzielczości grafiki: | 640 x 480 (VGA),1920 x 1200 (WUXGA) |
Złożone wejście wideo: | 1 |
Obsługiwane tryby wideo: | 480i,480p,576i,576p,720p,1080i,1080p |
OSD: | Tak |
Port DVI: | Nie |
Smart TV: | Nie |
System formatu sygnału analogowego: | NTSC,PAL,SECAM |
Wejście audio dla PC: | Tak |
Ilość portów Mini-USB 2.0: | 1 |
Zdanlne wyjścia IR: | 1 |
Interfejs SCSI: | RS-232 |
Jasność projektora: | 3300 ANSI lumenów |
Technologia projekcji: | DLP |
Naturalna rozdzielczość projektora: | WXGA (1280x800) |
Korekcja Keystone'a, poziom: | -40 - 40 ° |
Odległość projekcji: | - m |
Kompatybilność rozmiaru ekranu: | 60 - 180 " |
Rodzaj źródła światła: | Lampa |
Moc lampy: | 196 W |
Żywotność źródła światła: | 4000 h |
Żywotność źródła światła (tryb ekonomiczny): | 6000 h |
Stosunek padania: | 1.21 - 1.57:1 |
Współczynnik zbliżenia: | 1.3:1 |
Przesunięcie: | 120 % |
Wejście S-Video: | 1 |
Poziom hałasu (tryp ekonomiczn): | 28 dB |
Ilość kolorów: | 1.073 billionów kolorów |
PC Audio out: | Tak |
Pobór mocy (tryb ekonomiczny): | 220 W |
Odległość projekcji (tele): | 2.04 - 6.12 m |
Typ matrycy: | DMD |
Odległość projekcji (wide): | 1.57 - 4.71 m |
Pobór mocy (tryb gotowości sieci): | 6 W |
Tryby kolorów wideo: | Cinema,Dynamic,Presentation,sRGB |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ferplast Daytona Matic Gm, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Ferplast
8 Grudnia 2024
8 Października 2024
21 Września 2024
20 Września 2024
19 Września 2024
17 Września 2024
16 Września 2024
15 Września 2024
14 Września 2024
9 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Mauser
- Niesklasyfikowane Bavaria By Einhell
- Niesklasyfikowane 2box
- Niesklasyfikowane ETiger
- Niesklasyfikowane Raspberry Pi
- Niesklasyfikowane EWT
- Niesklasyfikowane Hegel
- Niesklasyfikowane TOTO
- Niesklasyfikowane Brigmton
- Niesklasyfikowane Joovy
- Niesklasyfikowane Meradiso
- Niesklasyfikowane Masterbuilt
- Niesklasyfikowane RTS
- Niesklasyfikowane CoolerMaster
- Niesklasyfikowane WeFix
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025