Instrukcja obsługi Festo EAHF-E24-60-P-S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Festo EAHF-E24-60-P-S (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6 użytkowników na średnio 4.6 gwiazdek

EAHF-E24-...-P-S

Profile mounting

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8203075

2023-12

[8203077]

8203075

Translation of the original instructions

© 2024 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

DocumentProductContent

Operating instructionAxis ELGD–

Tab. 1:

Applicable documents

2Safety

2.1Safety instructions

–Only mount the product on components that are in a condition to be safely

operated.

2.2

Intended use

The profile mounting attaches an axis ELGD to a mounting surface by the basic

profile.

2.3Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can eval-

uate the work and detect dangers. Personnel must have the relevant mechanical

training.

3

Additional information

–Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories

è

www.festo.com/catalogue.

4Product Range Overview

4.1Scope of delivery

1

Fig. 1:

Scope of delivery

1

Profile mounting (2x)

4.2

Not in scope of delivery

2

3

Fig. 2:

Not included in the scope of

delivery

2

Axis ELGD (1x)

3

M6 screw (2x)

5

Assembly

Fig. 3:Determine support spacings and mounting points

•Determine the required support spacingsL and the mounting points of the

axis Other applicable documents.è

1

2

A

B

Fig. 4:Positioning profile mountings

•

Position the profile mountings[1] at the mounting points.

Ä

The lug[A] lies in the slot[B] of the axis[2].

1

3

2

Fig. 5:

Installing profile mountings

1.

Select the suitable screws[3] for the installation situation.

2.

Press the profile mounting[1] against the axis[2].

Ä

The profile mounting[1] is flush with the axis[2].

3.Fasten the profile mountings[1] on the mounting surface with the screws[3].

Maximum tightening torque:7.6Nm

4.

Repeat the mounting steps for all mounting points.

Specyfikacje produktu