Instrukcja obsługi Fluke 2AC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke 2AC (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 35 osób i została oceniona przez 18 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
2AC
VoltAlert
Instruction Sheet
Read First: Safety Information
WX Warning
To avoid possible electric shock or personal injury:
● If the Tester is used in a manner not specied by the manufacturer,
protection provided by the Tester may be affected.
●Test on a known live source within the rated ac voltage range of the
product, both before and after use to ensure unit is in good working
condition.
● When using the Tester, if tip does not glow, voltage could still be
present. The Tester indicates active voltage in the presence of
electrostatic elds of sufcient strength generated from the source
(MAINS) voltage. If the eld strength is low, the Tester may not provide
indication of live voltages. Lack of an indication occurs if the Tester is
unable to sense the presence of voltage which may be inuenced by
several factors including, but not limited to:
●Shielded wire/cables
●Thickness and type of insulation
●Distance from the voltage source
●Fully-isolated users that prevent an effective ground
●Receptacles in recessed sockets/ differences in socket design
●Condition of the Tester and Batteries
●Do not use if the Tester appears damaged or if the Tester is not
operating properly. Specically examine the probe tip for cracks or
breakage before use. If in doubt, have the Tester serviced.
●Do not apply more than the rated voltage as marked on the Tester.
● Use caution with voltages above 30 V ac as a shock hazard may exist.
●Comply with local and national safety requirements.
●Use proper protective equipment as required by local or national
authorities.
Table 1. Symbols
TDouble Insulated.
XHazardous Voltage. Risk of electric shock.
WRisk of danger. Important information. See Instruction Sheet.
Conforms to relevant Canadian and US Standards.
Conforms to relevant European Union directives.
Conforms to relevant Australian standards.
Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website
for recycling information.
CAT IV Equipment is designed to protect against transients from the primary supply level.
(i.e. - electricity meter or overhead /underground utility service).
August 2010 Rev. 1, 7/11
© 2010-2011 Fluke Corporation. Specications are subject to change without notice. All rights
reserved. Printed in China.
FOR USE BY COMPETENT
PERSONS
Anyone using this instrument should be
knowledgeable and trained about the risks
involved with measuring voltage, especially
in an industrial setting, and the importance of
taking safety precautions and of testing the
instrument before and after using it to ensure
that it is in good working condition.
Specyfikacje produktu
| Marka: | Fluke |
| Kategoria: | Niesklasyfikowane |
| Model: | 2AC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Fluke 2AC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Fluke
9 Października 2024
9 Października 2024
9 Października 2024
4 Października 2024
1 Października 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
Instrukcje Niesklasyfikowane
- Efbe-schott
- Florabest
- WEICON
- Seagate
- Weishaupt
- Champion
- Neets
- Rolls
- Phidgets
- Silent Angel
- Nikkei
- Lingg & Janke
- XO
- Pieps
- Maxdata
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025