Instrukcja obsługi Fluke LVD2
Fluke
Niesklasyfikowane
LVD2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke LVD2 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 5.0 gwiazdek
Strona 1/3
LVD2
VoltAlert
Safety Sheet
Read First: Safety Information
WX Warning
To prevent possible electric shock, fi re, or personal injury:
● Use the Product only as specifi ed, or the protection supplied by the Product
can be compromised.
● Do not rely on the Product to detect the presence or absence of voltage on
a conductor for safety purposes. A single pole non-contact voltage detector
such as this Product is not suitable to determine if a circuit is hazardous. A
volt meter or 2-pole voltage detector is necessary to confi rm the absence of
hazardous voltage prior to commencing work.
● Do not use if the fl ashlight does not operate.
● Detect a known voltage fi rst to make sure that the Product operates correctly.
● When using the Product if tip does not glow, voltage could still be present.
The Product indicates active voltage in the presence of electric fi elds of
suffi cient strength generated from the source (MAINS) voltage. If the fi eld
strength is low, the Product may not provide indication of live voltages. Lack
of an indication occurs if the Product is unable to sense the presence of
voltage which may be infl uenced by several factors including, but not limited
to:
• Shielded wire/cables
• Thickness and type of insulation
• Distance from the voltage source
• Fully-isolated users that prevent an eff ective ground
• Receptacles in recessed sockets/ diff erences in socket design
• Condition of the Product and Batteries
● Disable the Product if it is damaged.
● Do not use the Product if it is damaged.
● Use Product with arrow visible.
● Hold the Product behind the tactile barrier.
● Do not use for dc voltage detection or around voltages exceeding
600 volts, or in the presence of variable motor drives.
● Use caution with voltages above 30 V ac as a shock hazard may exist.
● Do not stare or look directly at the LED fl ash light. The light is extremely
bright.
● Comply with local and national safety codes. Use personal protective
equipment (approved rubber gloves, face protection, and fl ame-resistant
clothes) to prevent shock and arc blast injury where hazardous live
conductors are exposed.
● Batteries contain hazardous chemicals that can cause burns or explode. If
exposure to chemicals occurs, clean with water and get medical aid.
● Remove the batteries if the Product is not used for an extended period of time,
or if stored in temperatures above 50 °C. If the batteries are not removed,
battery leakage can damage the Product.
● Carefully read all instructions.
● Read all safety information before you use the Product.
PN 4572337 September 2014 Rev. 1, 10/19
© 2014 -2019 Fluke Corporation. Specifi cations are subject to change without notice.
All rights reserved.
FOR USE BY COMPETENT
PERSONS
Anyone using this instrument should be
knowledgeable and trained about the risks
involved with measuring voltage, especially
in an industrial setting, and the importance of
taking safety precautions and of testing the
instrument before and after using it to ensure
that it is in good working condition.
Specyfikacje produktu
| Marka: | Fluke |
| Kategoria: | Niesklasyfikowane |
| Model: | LVD2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Fluke LVD2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Fluke
9 Października 2024
9 Października 2024
9 Października 2024
4 Października 2024
1 Października 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
Instrukcje Niesklasyfikowane
- Sencor
- Glyph
- Camry
- NovaStar
- Melitta
- Yard Force
- Spacedec
- Celestron
- JDC
- Honeywell
- Tvilum
- Wolf Garten
- OzCharge
- Seiki
- Lenovo
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025