Instrukcja obsługi Foscam FNA108HE
Foscam
nieskategoryzowany
FNA108HE
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Foscam FNA108HE (3 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/3
65 7 8
1 2 3 4
V1.1
305503000894
WARNING
Before installing a hard disk drive (HDD), please make sure the power
is disconnected from the NVR.
It is recommended that a hard drive be used in 7200 high-speed or
above.
1. Remove the cover from the NVR by unfastening the screws on the
rear and bottom.
2. Connect one end of the data cable and power cable to the
motherboard of NVR and the other end to the HDD.
3. Place the HDD on the bottom of the device and then fasten the
screws on the bottom to x the HDD.
4. Re-install the cover of the NVR and fasten screws.
Foscam cameras and NVRs require good security practices to
safeguard your privacy. You should regularly change your
camera or NVR password which is the combination of
numbers, letters and symbols.
You should update your camera or NVR regularly. Make sure
your camera or NVR has the latest rmware installed for your
specic model and better experience.
Quick Setup Guide
NVR
Screw Pack
DC Power Adapter
Ethernet Cable
Data Wire and Power Wire
of the Hard Drives
Warning Card
USB Mouse
Power cable
HDD
Data cable
Uncheck the checkbox
3. P2P. If you want to know the UID of the device, please scan
the QR code. If you don’t want to use the Setup Wizard
next time, uncheck the Setup Wizard checkbox. Click the
Finish button to complete the setup wizard.
or Right-click uncheck the →Main Menu →Conguration →
Setup Wizard Finish checkbox. Click the button to complete the
setup wizard.
Uncheck the checkbox
Download Foscam APP P2P
Package Contents
Security Warning
1 Before You Start 2 Hard Disk Installation
Procedure
1. If you want to use Foscam VMS or App, the NVR needs to be connected
to a router. If you only use the LAN to connect to the monitor, you don’t
need to connect to the router.
2. Connect your display to one of the video outputs (VGA or HD-OUT
interface).
3. Connect an external storage device to the USB interface of the NVR as
a backup.
4. Connect a mouse to the USB interface.
5. Some devices need to connect to your router using an Ethernet cable,
including the NVR, PC and IP Camera.
6. Connect the power adapter to the power input port.
7. The NVR DHCP server will open if it does not detect and connect a
router within the 30s, which is used for searching and connecting to
the IPC on the PoE NVR or switch.
Computer
Router
Ethernet
Cable
Ethernet
Cable
VGA Cable
Monitor
Mouse
NVR
HD OUT Cable
USB HDD
Ethernet
Cable
(PoE) Camera
NVR Power Adapter
(DC 48V)
TV
4 Device Connection
5 Log In
6 Setup Wizard
1. Turn on the power switch on the rear panel.
After the NVR starts up successfully, the power LED and HDD LED
indicators will turn green. The startup page is displayed on the
screen.
2. Change user name and password .
For your security, please set a new user name and password for your
NVR before Log In.
4. After modifying the password, you will be taken to the .Setup Wizard
7
Add IP Camera
You can add an IP Camera that is connected to the internet on the NVR.
3. Login page.
Enter the Username and Password, then click on the button.OK
*You need to set an inital user name and password for the first use.
*The maximum username lngth is 20, including numbers, letters and symbols:
_-@$*
*The password should be a combination of 6-12 numbers, letters, symbols.
Sybbols support: ~!@#%^*()_+{}:|<>?’-;\,./
3 NVR Rear Panel
Power Switch
GND
Power Input
(DC48V )
RJ45 VGA Output
Audio Out
Network
HD-OUT
USB Port
Alarm Indicator
REC Indicator
Power Indicator
If a router is connected at this time, the NVR cannot be found when
adding it by APP or VMS, and the NVR needs to be restarted.
Remarks: Users can customize the startup time or close of the NVR
DHCP server.
For detailed manuals, tools, etc., please visit foscam.com/downloads.
The Setup Wizard can walk you through some important settings on
the NVR.
1. Setting the time.
2. Format HDD. Click the button to set up the HDD. Format
Note that this will delete all les on the HDD.
HDD Full Setting Select Stop Record and Overwrite . .
1. Right-click on main interface, select .Channel Cong
2. Select or your IP Camera Auto added IPC
3. Click Add.
4. Enter username and password of the camera. If your camera is in the
factory default state, you do not need to enter the user name and
password.
5. Click OK.
Kitchen
Doorway
Garden
FOSCAM
FOSCAM
FOSCAM
Not Connected
Not Connected
Not Connected
192.168.1.100
192.168.1.107
192.168.1.109
XXXXXXXXX
XXXXXXXXX
XXXXXXXXX
1. Select Your IP Camera
2. Click Add
Select a protocol depending on which IP Camera you have.
FOSCAM protocol: The High Denition (HD) IP Cameras for Foscam.
ONVIF protocol: IP Cameras which support ONVIF protocol.
9
Auto Add Private IPC
Camera name
Bitrate Adaptive
Specyfikacje produktu
| Marka: | Foscam |
| Kategoria: | nieskategoryzowany |
| Model: | FNA108HE |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Foscam FNA108HE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Foscam
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
24 Września 2024
22 Sierpnia 2024
Instrukcje nieskategoryzowany
- Heckler
- Cuisinart
- Rigol
- IStarUSA
- DEDRA
- Megger
- Mattel
- Andover
- Black & Decker
- GeoVision
- Bogen
- Haeger
- HDFury
- PreSonus
- Manitowoc
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024