Instrukcja obs艂ugi Fredenstein Bento 6 DS
Fredenstein
Niesklasyfikowane
Bento 6 DS
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Fredenstein Bento 6 DS (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja by艂a pomocna dla 8 os贸b i zosta艂a oceniona przez 4.5 u偶ytkownik贸w na 艣rednio 4.4 gwiazdek
Strona 1/8
Bento 6 DS
Module Carrier
Operating Manual
Fredenstein Bento 6 DS Module Carrier
The Fredenstein Bento 6 DS is the most advanced module carrier for six Fredenstein Series 600
modules or API-500 compatible plug-in cards in 3U 19 inch rack format. The Bento 6 DS features
several important upgrades compared with third party products:
The color LCD Display and a rotary encoder: To set routing and other parameters with non-volatile
storage. In addition, if certain Fredenstein modules are used, like F600A, F601A, F602, F603A/B,
and the F607, all operating parameters of theses modules are displayed as well.
Universal power supply: accepting mains voltages from 90V AC to 240V AC, 50 to 60 Hz.
Increased output currents: 3A or 500 mA per slot and +48V DC 0.3A
Monitoring of output voltages and currents.
Auxiliary Audio Inputs and Outputs
Built-in Audio Routing: Modules can be daisy-chained by simply using the menu driven user
interface on the LCD.
Built-in compatibility switches for non-conforming modules.
Compressor buss linking: Compressor modules can be linked simply using the menu driven user
interface on the LCD as well.
Multilayer back-plane: Increased signal integrity and lower noise floor.
Ground-lift switching: In case of ground loops, the audio ground and the protective ground can be
disconnected. Please use only if absolutely necessary.
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
Always disconnect the mains cord before installing or removing modules!
If you need to replace the mains fuse, make sure the replacement has the same
rating ( 3 AT).
Please disconnect the mains from your Bento 6 DS before installing or removing modules. Make
sure each installed module is well seated in the receiving connector and the module is secured by
fasten the two mounting screws (size: M3).
Front View:
Fredenstein Bento 6 DS Manual V1.0 Jan 17, 2017 Page 1
Fredenstein Bento 6 DS Module Carrier
If certain non-Fredenstein modules are used, which bridge several pins on the connector and
connected the contacts on the top and button side, the double switches, located directly besides the
slot connectors, can both be turned off (lower position) to avoid interference between the module
and the digital interconnect. For Fredenstein modules, both need to be in the ON (upper) position.
Operation:
After installation of the modules, connect the mains cord to the Bento 6 DS IEC socket located on
the back-panel and than connect the mains cable to a grounded outlet. Now turn the Bento 6 DS on
by operating the I/O switch (also part of the IEC socket on the back). The following screen will be
displayed indicating the status and power-supply voltages.
Now the Bento 6 DS is ready and will display any request from
certain Fredenstein modules.
To enter the setup menu, please push the wheel and the setup menu
will appear.
Configuration of audio linking
Configuration of compressor buss linking
Various Setting
Save Configuration
Recall Configuration
Turning the wheel left or right to scroll from one menu point to the next, the highlighted menu point
will get selected when the wheel is pushed. Selecting Exit and pushing the wheel will show the
Status screen again.
Fredenstein Bento 6 DS Manual V1.0 Jan 17, 2017 Page 2
Specyfikacje produktu
| Marka: | Fredenstein |
| Kategoria: | Niesklasyfikowane |
| Model: | Bento 6 DS |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Fredenstein Bento 6 DS, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje Niesklasyfikowane Fredenstein
29 Wrze艣nia 2024
29 Wrze艣nia 2024
29 Wrze艣nia 2024
28 Wrze艣nia 2024
28 Wrze艣nia 2024
9 Wrze艣nia 2024
5 Wrze艣nia 2024
5 Wrze艣nia 2024
5 Wrze艣nia 2024
3 Wrze艣nia 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Dostmann Electronic
- Niesklasyfikowane Severin
- Niesklasyfikowane Aukey
- Niesklasyfikowane Energizer
- Niesklasyfikowane Comar
- Niesklasyfikowane Super Rod
- Niesklasyfikowane WeFix
- Niesklasyfikowane Mafell
- Niesklasyfikowane STI
- Niesklasyfikowane Toshiba
- Niesklasyfikowane Starburst
- Niesklasyfikowane Airman
- Niesklasyfikowane PCTV Systems
- Niesklasyfikowane Rapoo
- Niesklasyfikowane Bellini
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025