Instrukcja obsługi Garmin GT30-THP
Garmin
Niesklasyfikowane
GT30-THP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Garmin GT30-THP (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.3 gwiazdek
Strona 1/8
Thru-Hull Transducer
Installation Instructions
Important Safety Information
WARNING
See the guide in the Important Safety and Product Information
product box for product warnings and other important
information.
The device must be installed with at least one of the included
anti-rotation bolts. Failure to do so could result in the device
rotating while the boat is moving and could cause damage to
your vessel.
You are responsible for the safe and prudent operation of your
vessel. Sonar is a tool that enhances your awareness of the
water beneath your boat. It does not relieve you of the
responsibility of observing the water around your boat as you
navigate.
CAUTION
Failure to install and maintain this equipment in accordance with
these instructions could result in damage or injury.
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
This equipment should be installed by a qualified marine
installer.
To obtain the best performance and to avoid damage to your
boat, you must install the Garmin® transducer according to these
instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation,
contact Garmin Product Support.
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to .http://my.garmin.com
• Keep the original sales receipt, or a photocopy, in a safe
place.
Contacting Garmin Product Support
• Go to for in-country support www.garmin.com/support
information.
• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.
Loading the New Software on a Memory Card
You must copy the software update to a memory card.
1Insert a memory card into the card slot on the computer.
2Go to .www.garmin.com/support/software/marine.html
3Select next to “Garmin Marine Network with SD Download
card”.
4Read and agree to the terms.
5Select .Download
6If necessary, select or save and open the file.Run
7If necessary, select the drive associated with the memory
card, and select > .Next Finish
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card.
1Turn on the chartplotter.
2After the home screen appears, insert the memory card into
the card slot.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3Follow the on-screen instructions.
4Wait several minutes while the software update process
completes.
The device returns to normal operation after the software
update process is complete.
5Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
Tools Needed
• Drill
• 3 mm bit (1/8 in.)
• 9 mm bit (3/8 in.)
• 13 mm bit (1/2 in.)
• 25 mm spade bit (1 in.) (fiberglass hull)
• 29 mm spade bit (1 1/8 in.) (fiberglass hull)
• 32 mm spade bit (11/4 in.) (fiberglass hull)
• 32 mm hole saw (1 1/4
in.) (metal hull)
• Bandsaw or table saw
• Slip-joint pliers or crescent wrench
• Masking tape
• Marine sealant
• Epoxy or exposed core sealant (cored fiberglass hull)
About the Transducer
The transducer transmits and receives sound waves through the
water, and relays sound-wave information to your Garmin sonar
device.
Mounting Location Considerations
• On outboard and sterndrive vessels
À, the transducer should
be mounted in front of and close to the engine or engines.
• On inboard vessels Á, the transducer should be mounted in
front of and far away from the engine propeller and shaft.
• On step-hull vessels Â, the transducer should be mounted in
front of the first step.
May 2015 Printed in Taiwan 190-01774-02_0B
Specyfikacje produktu
| Marka: | Garmin |
| Kategoria: | Niesklasyfikowane |
| Model: | GT30-THP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Garmin GT30-THP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Garmin
10 Stycznia 2025
10 Stycznia 2025
31 Grudnia 2025
14 Października 2024
9 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
2 Października 2024
Instrukcje Niesklasyfikowane
- AER
- Really Right Stuff
- BERTSCHAT
- Hellberg
- Uvex
- Perfect Christmas
- ELTA Music
- G3
- Polaroid
- Livington
- Mitzu
- Tempmate
- VAIS
- Koala
- Hifonics
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025