Instrukcja obsługi GVM YR200D

GVM Niesklasyfikowane YR200D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GVM YR200D (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/2

DC IN

BATTERY

OFF

ADAPTER

BRG

MODE

CCT

1 5 6 7 8 9 10

GVM-YR200D

11 1242

Cooling hole

Color temperature

adjusting knob

Mode control

button

Adapter

interface

Battery tank

Brightness control

Integrated

control channel

Select button

LCD display screen

Angle ﬁxing knob

Lamp rack interface

2Loosen the knob on the left of the bracket, adjust the angle you

need, and then tighten the adjustment knob on the left of the

bracket.

Power switch

CH:

Rotate

Slave

Master

APP

CCT :

5 67

Lamp holder

ﬁxing knob

FacebookGVM Ofﬁcial

website

Download APP

Web: www.gvmled.com

B&H Ema il: bh@gvmled.com

GVM Email: support@gvmled.com

Amazon Email: amazonsupport@gvmled.com

Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA

PRECAUTIONS

①Please use the matching power adapter or lithium battery with the same

speciﬁcation to power the product. Do not use power adapter with

different output voltage parameters.

The product is not waterproof, please use it in rainproof environment.②

The product is not anti-corrosion, therefore do not let the product touch

any corrosive liquid.

③

When using the product, make sure the product is put ﬁrmly and prevent

from falling and damage.

④

If the product will not be used for a long time, please switch off the power

to reduce energy loss.

⑤

DISCLAIMERS

Before using t his pr oduc t, please re ad the instructions carefully and make sure

use t he pr oduct corr ectly. If you d on’t obey th e instructions and warnings, you

mayb e c ause ha rm to your self and the people a roun d, or even damage the

prod uct an d ot her th ings ar ound.

2. Once you use this product, you are deemed to have read the disclaimer and warning

carefully, understand and acknowledge all the terms and contents of this statement,

and promise to take full responsibility for the use of this product and possible

consequences.

Welcome to "GVM-YR200D". This product is specially designed for senior

photography enthusiasts. The product is suitable for live / outdoor / studio

photography, and also for YouTube video shooting. The main features of

the product are:

PRODUCT INTRODUCTION

①

③

Step-less adjustable dual color temperature feature, color range 3200K ~

5600k, Using LED bulbs, which is helpful to restore and enrich the color of

objects and provide you with natural and vivid shooting effect.

With an LCD screen and stable system, which can support 180 ° rotation

and effectively control the light Line. You can customize the control of ﬁll

light, so that you can easily shoot the desired results.

We ﬁrmly believe that the correct use of this product will deﬁnitely help your

shooting work. Before using the product, we strongly recommend that you

carefully read the following user guide.

②APP intelligent control system, which can be controlled by your smart mobile

devices.

PRODUCT

STRUCTURE ICON

1The lamp can be installed and ﬁxed on the bracket by rotating the knob

clockwise, and unloaded by rotating in the counterclockwise direction.

INSTALLATION

METHOD

3There are two power supply modes to choose.

① connect the power cord and adapter for power supply.

② purchase two other suitable lithium batteries and use them for power

supply. ( both battery cells must be pl ugged in to power )

Adapter interface

（）battery lead

Battery installation slot

Power input interface

Power switch

Mode control button: Change mode control

Change channel button: When is in master/slave mode, press this button

to select the channel.

Color temperature adjustment button: adjust the color temperature

LCD screen: The screen display the current brightness, control mode,

light mode, light parameters, scene number, channel numerical, and

battery power of the light.

Brightness adjustment button: Adjust the brightness

DESCRIPTION OF

PRODUCT CONTROL KEYS

③ Adjust brightness : (BRG) range 0%~100%

⑦ On-line control (Joint control between lamps and lanterns):

The screen display the current brightness, control mode, light mode, light

parameters, scene number, channel numerical, and battery power of the light.

④ Adjust color temperature : (CCT) range 3200K~5600K

⑥ APP control:

Switch the photography light to the APP mode, connect the Bluetooth of the

camera light through the mobile phone, and then use the APP to control the

brightness, color temperature, channel, and on/off of the camera light. If

there is a slave, you can also go through the APP Perform online control.

Prepare two or more photography lights, set one to Master mode, and the

others to Slave mode, and set the channel (CH) of the master and slave.

When the master and slave channels are the same, the slave of the same

channel can be synchronously controlled through the controller behind

the master.

Prepare two or more photography lights, set one to APP mode, and

connect the mobile phone APP to set the channel; set the rest to Slave

mode, and set the same channel. When the APP mode machine connected

with the mobile phone APP and the slave machine channel are the same,

at this time, the connected APP mode machine can be controlled through

the mobile phone APP, and the slave machine of the same channel as the

APP mode machine can be synchronously controlled.

In Master mode / Rotate mode, short press the composite knob to switch

the light mode to CCT, and then turn the composite knob button to adjust

the color temperature.

In APP mode, connect to APP and adjust color temperature through APP.

In Master mode / Rotate mode, turn the brightness adjustment knob to

adjust the brightness.

In APP mode, connect to APP and adjust brightness through APP.

① ：LCD screen

Press the mode button to change the control mode, such as:

Rotate, slave, master, APP

② ：Mode types and functions

CH:

Rotate

Slave

Master

APP

CCT :

Battery p ower

Brightness

Channel

numerical

Control m ode

Color temperature

parameters

(Only display the current

control mode)

⑤ Adjust CH: range 0~11

In Master mode/Slave mode, tap the plus/minus key to set the channel value.

In APP mode, connect to APP and set the channel value through APP.

FUNCTION INSTRUCTION &

INSTRUCTION FOR USE

Rotate mode: Adjust the parameters of the light through the controller

behind the light.

Slave mode: The channel can only be adjusted through the ▲ and ▼

buttons of the controller behind the light. When the channels of the slave

and the master are the same, they can be synchronously controlled by

the master.

Master mode: adjust the light and channel of the light through the controller

behind the light, and the slaves of the same channel will also be adjusted

synchronously.

APP mode: adjust the light parameters through APP.

Rotate mode:

Slave mode:

APP mode:

Short press the compound knob to switch the light mode, which are: CCT,

HUE, SAT; Long press the compound knob for 3 seconds to enter/exit the

scene mode.

Master mode:

CCT: adjustable color temperature, range 3200K~5600K

HUE: Adjustable light color, range 0°~360°

SAT: adjustable light color saturation, range 0%~100%

SC: The product can simulate 8 kinds of scene lights: Lightning, Police ① ②

car, Candlelight, TV, Bad light bulb, Party, ③ ④ ⑤ ⑥ ⑦ ⑧Disco, Paparazzi.

CCT:

HUE:

SAT:

SC:

14 15

SIMPIE FAULTS

AND TROUBLESHOOTING

Phenomenon

①

②

Check if the mode were set as

slave mode, lightness and color

temper atur e of the produc ts

cannot be controlled in slave

mode.

Make sure the adapter is we ll

contacted with the power p lug.

Charge the battery before using

it.

Pressthe“MODE”button for once,

switch the mode from slave mode

to master mode.

Check the product Troubleshooting

The switch

indicator

does not light up

The brightness/

color temperature

knob is out of

control

Check the matching power

adapter indicator lig ht up

or no t.

When usin g lithium battery,

make sure there's no "low

power" protectio n.

APP can't

connect / can't

control

Check if th e prod uct is “OFF”

because of the APP of the

mobile phone.

Press the “ON/OFF” butto n once

again.

The product is in

the "ON" state,

the display and

lights are not on

Check whether the de vice is

in APP mode and wh ethe r

"BT_LED" is displayed on the

APP

Normal steps:

① Switch to APP mode after

boo ting;

② Turn on bluetooth and GPS on

the phone

③ Open the APP, search an d

con nect to Blue tooth BT_LED

USE AND

PRESERVATION

Do not put the product in a highly humid, strong electromagnetic ﬁeld,

direct sunlight, high-temperature environment. If not use the product for a

long time, disconnect the power and take out the battery.

Clean：Before c lean , discon nect the pow er plug. And use wet cloth r ather than any

dete rgent or solub le liquid, avoiding damaging the s urfa ce layer.

Repairing：If there is fault or performance degradation, do not unpack the shell by

yourself, avoiding damage the machine and lose the right of maintenance. When there

is a fault, do not hesitate to contact us, and we will do our best to deal with the problem.

Accessories：Please u se the accesso ries pr ovide d by m anufa cturer and a pprov ed

ones, i n order to maximize the performance.

Guarantee：Do does not modify the product, or you will lose the right of maintenance.

Clean：

Repairing：

Accessories：

Guarantee：

Power：Make sure the power is in the demanded range, not too high or too low. Correctly

load the battery, in order not the damage to machine.

Power：

Scan the QR code on the back of the manual to download the APP

APP CONTROL AND

APP ON-LINE CONTROL

If there is a slave, the APP will synchronously control the slave of the same

channel as the connected APP mode machine.

Turn on the video light and set the mode to APP mode. Open the “GVM_LED”

application software on the phone ( The phone needs to turn on bluetooth and

GPS), then enter the bluetooth's search interface Find the bluetooth →

named “BT_LED” and connect Wait for connection After connect → →

success, it will automatically enter the app's control interface. At this time, the

video light have been connected and you can controll the APP.

You can save 6 custom light effects in “My Scenes”. After setting the light

effect parameters click the “ ” icon in the right corner pop up the → →

“Save Current Scenes” click “OK”. This light effect can be found in “My →

Scenes” at this time.

Color temp er atur e contro l interfac e Save lig ht e ffec t in terf ac e

PRODUCT DETAILS PACKING

LIST

Photography lights 1

Power Cord 1

Adapter 1

N a me Q ua n t i t y N o t es

User Manual

C O N T E N T S

Product introduction Page 1- ---------------------------------------- --

Disclaimers Page 2--------------------------------------------------------

Precautions Page 2---------- ------------------------ ---------------------

Product details Page 3 ----------- ------------ -------------- --------- ----

Product structure analysis Page 4--------------------- ------------- --

Installation method Page 5 7~------------------------ --- ------------- -

Description of product control keys Page 8----------- ---------- --

Function introduction and instruction for use ----------------------

----------------------------------------------------------------- --- Page 9~11

APP control and APP on-line control Page 12------------------ ---

Use and preservation Page 13-----------------------------------------

Simple faults and troubleshooting Page 14------------------------

Packing list Page 15-------------------------------------------------------

Brand : GVM

Product Name : Photography lights

Product Type : Photography Fill Light

Product model : GVM-YR200D

Product material : Plastic

Lamp beads quantity : 624

Color rendering index : ≥97

Color temperature : 3200K~5600K

Brightness : 4500lux/0.5m, 1500lux/1m

Light adjustment method : Step-less adjustment

Light angle of lamp bead : 120°

Features / Features : APP, Joint control,

High color rendering index light beads

Power : 50W

Voltage : DC 15V

Power supply mode : DC input & Battery

Power supply : DC15V/4A

Battery Capacity : lithium battery*2 (Need to buy)

Product Weight : 1.45KG

Product Size ( mm ) : D300*53

Cooling : Natural heat dissipation

Commodity origin : China. Huizhou

Specyfikacje produktu

Marka:	GVM
Kategoria:	Niesklasyfikowane
Model:	YR200D
Kolor produktu:	Czarny
Źródło zasilania:	Prąd przemienny
Kolor światła:	Blue,Red
Ilość kanałów DMX:	10 kan.
Wejście XLR:	Tak
Napięcie:	220 - 240 V
Częstotliwość danych wejściowych:	50 Hz
Średnica piłki:	- "
Wyjście XLR:	1