Instrukcja obsługi Hager TXA661B

Hager ściemniacz TXA661B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager TXA661B (3 stron) w kategorii ściemniacz. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/3

6LE000384C

TYA661..

Dimmer 1gang

TXA661..

Dimmer 1gang

6LE000384C1

Safety instructions

Electrical equipment may only be installed and

assembled by a qualied electrician in accord-

ance with the relevant installation standards,

guidelines, regulations, directives, safety and

accident prevention regulations of the country.

Failure to comply with these instructions may

result in damage to the device, re or other

hazards.

Hazard due to electric shock. Disconnect be-

fore working on the device or replacing illumi-

nants. Take into account all circuit breakers

that supply dangerous voltages to the device.

Hazard due to electric shock. The device is not

suited for safe disconnection of the mains sup-

ply. Even when the device is switched off, the

load is not galvanically separated from the

mains supply.

Hazard due to electric shock on the SELV or

PELV installation. Do not connect any loads for

low voltage SELV, PELV or FELV together.

Do not connect any LED or compact uores-

cent lamps that are not expressly suitable for

dimming. The device could get damaged.

Do not connect lights with integrated dimmer.

Do not connect capacitive load and inductive

loads together on the output.

The permissible maximum load per device

must not be exceeded.

These instructions are an integral component

of the product and must be retained by the end

user.

Design and layout of the device

(1)

(2)

(3) (4)

(5)

(6)

(7)

(8)

(9)

(10)

Figure 1: Device overview

(1) Slide switch auto/min/max/manu

(2) Illuminated button for dimming mode

(3) KNX bus connection terminal

(4) Connection of load

(5) Labelling eld with cover

(6) Illuminated programming button

(7) Operation button for manual operation with

status LED

(8) Control LED short-circuit and overload pro-

tection

(9) Control LED overheating protection

(10) Mains connection

Function

System information

This device is a product of KNX system and corre-

sponds to the KNX guidelines. Detailed specialised

knowledge obtained from KNX training courses

is required for comprehension. The planning,

installation and commissioning of the device is

carried out with the help of KNX-certied software.

Systemlink start-up:

The function of the device is software-depend-

ent. The software is to be taken from the product

database. You can nd the latest version of the

product database, technical descriptions as well as

conversion and additional support programmes on

our website.

Easylink start-up:

The function of the device is conguration-de-

pendent. The conguration can also be done using

devices developed specially for simple setting and

start-up.

This type of conguration is only possible with

devices of the easylink system. Easylink stands for

easy, visually supported start-up. Precongured

standard functions are assigned to the in/outputs

by means of a service module.

Functional description

The device has a load output. It works with auto-

matic load detection depending on the connected

load in the phase cut-on or phase cut-off and ena-

bles switching and dimming via the KNX bus of:

- Incandescent lamps and halogen lamps

- Low-voltage halogen lamps with conventional

or electronic transformer

- dimmable LED and energy-saving lamps

Additionally, the device has a learn function for

more efcient control of energy-saving lamps and

230 V LED lamps.

Correct use

- Dimming of electrical loads AC 230 V.

- Installation on DIN rail according to DIN EN

60715 in distribution box.

Product characteristics

- Status display of the output on the device

- Manual activation of the output on the device

possible, building site operation

- Automatic load detection

- Setting the minimum and maximum dimming

value

- Timer functions

- Scene function

- Forced position by higher-level controller

Short-circuit and overload protection

Short-circuit and overload are signalled via the

control LED (8). The load is throttled (see Trouble-

shooting).

Overheating protection

Overheating of the device is signalled by a perma-

nent light of the control LED (9). The connected

load is throttled (see Troubleshooting).

Specyfikacje produktu

Marka:	Hager
Kategoria:	ściemniacz
Model:	TXA661B
Kolor produktu:	Szary
Zakres temperatur (eksploatacja):	-5 - 45 °C
Stopień ochrony IP:	IP20
Liczba dołączonych produktów:	1 szt.