Instrukcja obsługi Hähnel Viper TTL Receiver
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hähnel Viper TTL Receiver (2 stron) w kategorii Błysk. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
IRL/UK: Set up
The “Viper TTL receiver” is used together with “Viper TTL transmitter” or “Modus
600RT”.
• Attach Speedlight to <hot shoe> 10 of the Viper TTL receiver. Using the slide
switch 16 select one of the group A, B or C for this receiver. Turn on 12 the
Viper TTL receiver which will give a green ashing light 11 to indicate power
is on. Turn on the Speedlight. Press <Test> button 15 on receiver to conrm
Speedlight is working
• Using the cable socket 14 a studio light can be connected to the Viper TTL
receiver via a “Hähnel Studio Light Cable” which is available as a separate
accessory
• Unlimited numbers of Speedlights / studio lights with Viper TTL receivers can
be allocated to one or different groups
• For “Nikon” version, set the Nikon Speedlight to <i-TTL> mode
DCM Digital Channel Matching
• Open channel - When you use the Viper TTL for the rst time, the 2.4GHz
wireless connection is using a default “open channel”. This allows several
transmitters to individually control the same selection of receivers. The “open
channel” can be useful when using several cameras with the same lighting
system. But it is also more prone to other outside interferences
• DCM - Digital Channel Matching is a more secure coded wireless system
which will avoid any external interference between Viper TTL transmitter and
receiver. Carry out the following set up to match all your devices
• A - Turn off both Viper TTL transmitter and receiver
• B - <Test> button Hold down on the transmitter and turn ON “transmitter”.
LED on the transmitter will ash rapidly, release the test button and LCD on
the transmitter will display “coding”
• C <Test> button- Now hold down receiver
15 and turn ON 12 “receiver”. The
LED 11 will ash green rapidly. Release <Test> button 15. The LED 06 will
change to red ON all the time conrming DCM is completed
• D - If you have additional Viper TTL receivers, then repeat stage “C”. (Viper
TTL transmitter must still be in “coding”)
• If you are using the Viper TTL in combination with the hähnel Modus 600RT
Speedlight, you can still DCM all devices. Use the same procedure from A to D and
then also DCM match the Modus 600RT as a slave version as explained in Modus
manual
• It is possible to reset the Viper TTL transmitter and receiver to “open channel”
• Hold down <Test> button on transmitter and turn ON transmitter and continue to
hold down button on transmitter for more than 5 sec. LED on transmitter will change
from rapid ashing to always ON. Transmitter is now “open channel”
• Now hold down receiver <Test> button 15 and turn ON receiver and continue to
hold down button 15 for more than 5 sec. LED 11 will change from rapid ashing to
always ON. Receiver is now “open channel”
• If you wish to use old 3rd party Speedlight’s which are not E-TTL or i-TTL compatible,
then set switch 16 to Group “C” whilst performing the reset of the Receiver to “open
channel”. This allows 3rd party Speedlight’s to be triggered in Speedlight “M” mode.
Check our website www.hahnel.ie for more info
hähnel
/MODUS 600RT
GROUP A
hähnel
/MODUS 600RT
GROUP B
Viper TTL
Transmitter
MASTER
Viper TTL RX with
3rd Party Speedlight
GROUP C
Set up
Quick Start
Guide
Receiver
Viper TTL Receiver Controls
15 14 13 11
16
10
12
Receiver
(10) Hot shoe
(11) Power / Status LED
(12) ON/OFF Switch
(13) Micro USB - rmware update
(14) Remote control cable socket
(15) Test Button
(16) Group A / B / C switch
hähnel
/MODUS 600RT
GROUP A
hähnel
/MODUS 600RT
GROUP B
Viper TTL
Transmitter
MASTER
Viper TTL RX with
3rd Party Speedlight
GROUP C
Set up
Specyfikacje produktu
| Marka: | Hähnel |
| Kategoria: | Błysk |
| Model: | Viper TTL Receiver |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hähnel Viper TTL Receiver, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Błysk Hähnel
11 Września 2024
26 Sierpnia 2024
25 Sierpnia 2024
17 Sierpnia 2024
16 Sierpnia 2024
16 Sierpnia 2024
Instrukcje Błysk
- Triopo
- Impact
- COLBOR
- Genaray
- PolarPro
- Lastolite
- Konica Minolta
- Aputure
- ANDYCINE
- Quantum
- Cullmann
- Audio-Technica
- GVM
- Braun
- Metz
Najnowsze instrukcje dla Błysk
1 Kwietnia 2025
29 Marca 2025
29 Marca 2025
27 Marca 2025
9 Marca 2025
3 Marca 2025
26 Lutego 2025
25 Lutego 2025
6 Lutego 2025
5 Lutego 2025