Instrukcja obsługi Hähnel Viper TTL Transmitter
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hähnel Viper TTL Transmitter (2 stron) w kategorii Błysk. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 13.5 użytkowników na średnio 3.5 gwiazdek
Strona 1/2
Quick Start
Guide
Transmitter
What’s in the box
The Viper TTL transmitter included is used together with the Viper TTL receiver
(sold separately) or the Modus 600RT Speedlight (sold separately). The Viper
TTL transmitter wirelessly control three separate groups A, B or C a multiple of
Modus 600RT Speedlight’s or other Speedlight’s tted with the Viper TTL receiver
• You must ensure that you have the correct Viper TTL transmitter brand type (Canon,
Nikon or Sony) e.g. A Viper TTL transmitter “Canon” will only work with a “Canon”
type Viper TTL receiver or Modus 600RT
• The Viper TTL transmitter is powered by any AA battery types which are readily
available in the market
• You may check our website www.hahnel.ie for more information of available Viper
TTL receivers and Modus 600RT Speedlight’s
Group Power Control setting for Manual
and TTL FEC
• From the Viper TTL transmitter you can adjust the power level of each group
which is in mode<M>
• From the Viper TTL transmitter you can adjust the FEC level of each group
which is in mode<TTL>
Simultaneous Group power adjustment - FEC
adjustment
From the Viper TTL transmitter you can easily adjust the output power level and
FEC setting for all groups
Multi : Stroboscopic Flash
With stroboscopic ash, a rapid series of ashes are red. It can be used to
capture multiple images of a moving subject in a single photo.
• For “Sony” version the Multi stroboscopic mode is only available when used with
the hähnel Modus 600RT Speedlight.
High Speed Sync
With high-speed sync (FP ash), the ash can synchronise with all shutter
speeds
• For “Nikon” version ensure also that the camera setting is set to 1/320’s (Auto
FP) or 1/320’s (Auto FP). Both Viper transmitter and Camera menu must be set to
HSS. Refer to camera manual for more info.
Second Curtain Sync
In second curtain sync the ash ashes right before the shutter closes
• For “Nikon” version, the Second Curtain Sync (Rear-curtain sync) is not controlled
from the Viper TTL. To enable Second Curtain Sync set in the camera menu to
Rear-curtain sync. Refer to camera manual for more info
• For “Sony” version the Second Curtain Sync is controlled by the Menu setting of
the camera. Refer to camera manual for more info.
High Speed Sync
With high-speed sync (FP ash), the ash can synchronise with all shutter
speeds
• For “Nikon” version ensure also that the camera setting is set to 1/320’s (Auto
FP) or 1/320’s (Auto FP). Both Viper transmitter and Camera menu must be set
to HSS. Refer to camera manual for more info.
Viper TTL Controls
08
06
05 04
A B C
07
09
01
03
02
Transmitter
(A) Group A
(B) Group B
(C) Group C
(1) ON/OFF Switch
(2) SEL – select button
(3) Adjust Dial – To adjust
settings
(4) Lock wheel
(5) LCD
(6) Power / Status LED
(7) Hot shoe
(8) Test Button
(9) Micro USB – rmware
update
Transmitter LCD Screen
23
22
20
21
1918
17
Multi Mode
262524
B CA
(17) Manual / TTL / OFF Mode
(18) Flash exposure compensation
amount
(19) Manual ash output
(20) High-speed sync
(21) Second curtain sync
Group A - On Multi mode
Group B - Off
Group C - Multi ModeOn
(22) Always On
(23) Battery indicator
(24) Number of ashes
(25) Flash frequency
(26) Flash output power
Group A - OFF
Group A - ON
A
AABC
hähnel
/MODUS 600RT
GROUP A
hähnel
/MODUS 600RT
GROUP B
Viper TTL
Transmitter
MASTER
Viper TTL RX with
3rd Party Speedlight
GROUP C
Set up
Specyfikacje produktu
| Marka: | Hähnel |
| Kategoria: | Błysk |
| Model: | Viper TTL Transmitter |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hähnel Viper TTL Transmitter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Błysk Hähnel
11 Września 2024
26 Sierpnia 2024
25 Sierpnia 2024
17 Sierpnia 2024
16 Sierpnia 2024
16 Sierpnia 2024
Instrukcje Błysk
- Metz
- COLBOR
- Luxli
- Asus
- PolarPro
- Fujifilm
- Quantum
- Rollei
- Genaray
- Vello
- Dracast
- Ikelite
- Goodram
- Pentax
- Nissin
Najnowsze instrukcje dla Błysk
1 Kwietnia 2025
29 Marca 2025
29 Marca 2025
27 Marca 2025
9 Marca 2025
3 Marca 2025
26 Lutego 2025
25 Lutego 2025
6 Lutego 2025
5 Lutego 2025