Instrukcja obsługi Hazet 5121KV

Hazet maszyna śrubowa 5121KV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hazet 5121KV (2 stron) w kategorii maszyna śrubowa. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/2

Made in Germany

5108 KV 2 – 10 Nm

5109 KV 5 – 25 Nm

5121 KV 20 – 120 Nm

224487

✔

90°

IEC 60900:2018

„click“

Live-line working only permissible when using

HAZET operating tools which are marked with

1000V and conform to IEC 60900.

KV tools may only be used by trained

specialist personnel.

CAUTION: Before each use, a visual inspection of every hand

tool must be made by the user to ensure the integrity of the

insulation. If there is doubt concerning its safety, the hand

tool may not be used and should either be scrapped or inspected by a

specialist and, if necessary, rechecked.

It is recommended that an appropriately trained person carries out

an annual visual inspection and functional check to determine the

suitability of the hand tool for further use. If, according to national

regulations or buyer's specifications or otherwise in cases of doubt

after a visual inspection, a further voltage test is required, a voltage

test should be carried out in accordance with DIN EN 60900 for

insulated or insulating tools.

NOTE: Torque wrenches must be checked and adjusted

annually or after 5000 releases in accordance with DIN EN

ISO 6789-2:2017.

CAUTION: Only tools that conform to IEC60900

specifications may be connected to each other.

The torque wrench is only to be used for tightening screw

connections, not for loosening.

Application: HAZET 5108 KV, 5109 KV and 5121 KV

To attach a KV socket, press the lock/

unlock button and insert the socket.

To ensure that the complete

assembly of the tool made from

insulated tool components from

various manufacturers is able to

withstand separating forces, as

are expected during intended use,

the user must make sure that the

holding mechanisms of all parts

used are effective before use by

manually tightening in the direction of

separation.

To set the desired torque value, pull

the locking sleeve back and adjust by

turning the handle. Then ensure the

locking sleeve is properly locked into

place.

Only 5121 KV:

- Pull the locking sleeve towards the

handle and and unlock it by turning it

to the left.

- Set the desired value by turning the

handle.

- Please turn the locking sleeve to

the right and ensure that the locking

sleeve is properly locked into place.

To use the torque wrench for

counterclockwise tightening, grip the

sliding square from underneath and

pull out the sliding square by pressing

the lock/ unlock button and insert it

again on the desired (other) side. Press

the lock/ unlock button here too.

Maintenance and care:

Clean the wrench only with a dry cloth. Do not use solvents otherwise

the insulation will be damaged.

Storage:

CAUTION: Insulated hand tools must be kept in a safe place.

The insulation must not be damaged!

Only store and transport in original packaging!

NOTE: Insulated and insulating hand tools must be kept in

a safe place in order to minimise the risk of damage to

insulation caused by storage and transport. These hand

tools should generally be stored separately from other tools to prevent

mechanical damage and avoid confusion. It should also be ensured

that the tools are not stored near strong heat sources or sources of UV

radiation.

Do not dispose in household waste

Specyfikacje produktu

Marka:	Hazet
Kategoria:	maszyna śrubowa
Model:	5121KV
Kolor produktu:	Stal nierdzewna
Typ produktu:	Kompresor ro robienia lodów
Materiał obudowy:	Stal nierdzewna
Moc:	250 W
Typ kontroli:	Buttons,Rotary
Wbudowany wyświetlacz:	Tak
Łatwy do czyszczenia:	Tak
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220 - 240 V
Wysokość produktu:	399 mm
Szerokość produktu:	315 mm
Głębokość produktu:	272 mm
Waga produktu:	14600 g
Długość kabla:	1.5 m
Typ ekranu:	LCD
Wbudowany zegar:	Tak
Okienko:	Tak
Książka z przepisami:	Tak
Pojemność miski:	2.5 l
Zdejmowalna misa:	Tak
Licznik timera (maksymalny):	60 min
Czas przygotowania:	45 min
Liczba umywalek:	1 mis(y)