Instrukcja obsługi Hikvision DS-2CE56D7T-ITM
Hikvision
Kamera monitorująca
DS-2CE56D7T-ITM
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-2CE56D7T-ITM (7 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/7

TURBO HD
D(F) Series Turret 7T
Camera
User Manual
UD00405B
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, please do not hesitate to
contact the dealer.
This manual applies to the models below:
Type
Model
Type I
Camera
DS-2CE56D(F) -IT1 7T
DS-2CE56D(F) -IT3 7T
Type II
Camera
DS-2CE56D(F) -ITM 7T
This manual may contain several technical incorrect
places or prinng errors, and the content is subject to
change without noce. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
01000010 1 60 12

Privacy Noce
Surveillance laws vary by jurisdicon. Check all relevant
laws in your jurisdicon before using all this product for
surveillance purpose to ensure that your use of this
product conforms.
Regulatory Informaon
FCC Informaon
FCC compliance: This equipment has been tested and
found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to
radio communicaons. Operation of this equipment in a
residenal area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Direcve
2006/95/EC, the EMC Direcve 2004/108/EC.
2002/96/EC (WEEE direcve): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more
informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This
product contains a baery that cannot be
disposed of as unsorted municipal waste in
the European Union. See the product
documentaon for specic battery
informaon. The baery is marked with
this symbol, which may include leering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a
designated collecon point. For more informaon see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.

1 Introducon
1.1 Product Features
This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resoluon, low distoron, and low noise,
etc. It is suitable for surveillance system and image
process system.
The main features are as follows:
High performance CMOS sensor and high resoluon
bring high-quality image;
Low illuminaon, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;
IR cut lter with auto switch;
OSD menu, parameters are congurable;
Auto white balance and internal synchronization;
SMART IR mode;
True WDR;
Advanced 3-axis design meets dierent installation
requirements;
1.2 Overview
This manual applies to two types of turret cameras.
The overviews of each type are shown in the gures below,
please refer to the actual sample.
1.2.1 Overview of Type I Camera
Main Body
Mounng Base
Enclosure
Video Cable
DC 12V
Power Cord
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type Camera II
Enclosure
Mounng Base
Video Cable
DC 12V
Power Cord
Camera
Trim Ring
Clip Plate
Figure 1-2 Overview of Type II Camera
Specyfikacje produktu
Marka: | Hikvision |
Kategoria: | Kamera monitorująca |
Model: | DS-2CE56D7T-ITM |
Kolor produktu: | Biały |
Typ produktu: | Projektor do dużych pomieszczeń |
Źródło zasilania: | Prąd przemienny |
Wbudowany wyświetlacz: | Nie |
Częstotliwość wejściowa AC: | 50 - 60 Hz |
Napięcie wejściowe AC: | 100-240 V |
Wysokość produktu: | 161 mm |
Szerokość produktu: | 360 mm |
Głębokość produktu: | 440 mm |
Waga produktu: | 11000 g |
W zestawie pilot zdalnego sterowania: | Tak |
Szerokość opakowania: | 559 mm |
Wysokość opakowania: | 301 mm |
Głębokość opakowania: | 469 mm |
Certyfikat środowiskowy (zrównoważonego rozwoju): | RoHS |
Poziom hałasu: | - dB |
Wbudowane głośniki: | Tak |
Moc wyjściowa (RMS): | 10 W |
Certyfikaty: | FCC, UL/CUL |
Ilość portów Ethernet LAN (RJ-45): | 1 |
Umieszczenie: | Komputer stacjonarny |
Zakres temperatur (eksploatacja): | 0 - 40 °C |
Zakres wilgotności względnej: | 0 - 90 % |
Natywne proporcje obrazu: | 16:9 |
Wi-Fi: | Nie |
Skrócona instrukcja obsługi: | Tak |
Przewody: | AC,VGA |
Kod zharmonizowanego systemu (HS): | 85286200 |
Pobór mocy w trybie czuwania: | 0.5 W |
Wejscie Audio (L,P): | 1 |
Liczba portów USB 2.0: | 1 |
Przewodowa sieć LAN: | Tak |
Zintegrowany czytnik kart: | Nie |
Pobór mocy: | 430 W |
Waga wraz z opakowaniem: | 13600 g |
Ilość portów HDMI: | 3 |
Port RS-232: | 1 |
Współczynik kontrastu (dynamiczny): | 100000:1 |
Kensington Lock: | Tak |
Typ gniazda zamka kabla: | Kensington |
Liczba portów VGA (D-Sub): | 2 |
Wyście mocy ac: | Tak |
Ilość wbudowanych glosników: | 2 |
Długość ogniskowa: | - mm |
Zasięg skanowania w poziomie: | 15 - 102 kHz |
Zasięg skanowania (długość): | 23 - 120 Hz |
Obsługiwane rozdzielczości grafiki: | 640 x 480 (VGA),1920 x 1200 (WUXGA) |
Złożone wejście wideo: | 1 |
OSD: | Tak |
Port DVI: | Nie |
Zoom optyczny: | 1.65 x |
Rodzaj złącza HDMI: | Pełnorozmiarowy |
Pełny HD: | Tak |
Wejście audio dla PC: | Tak |
Interfejs SCSI: | RS-232 |
Jasność projektora: | 5500 ANSI lumenów |
Technologia projekcji: | DLP |
Naturalna rozdzielczość projektora: | WUXGA (1920x1200) |
Odległość projekcji: | 1.3 - 12.5 m |
Kompatybilność rozmiaru ekranu: | 30 - 300 " |
Rodzaj źródła światła: | Laser |
Żywotność źródła światła: | 20000 h |
Żywotność źródła światła (tryb ekonomiczny): | 30000 h |
Stosunek padania: | 1.2 - 1.9:1 |
Ilość kolorów: | 1.073 billionów kolorów |
Zakres poziomego przesuwania obiektywu: | -2.5 - 2.5 % |
Zakres pionowego przesuwania obiektywu: | -2.4 - 9.2 % |
PC Audio out: | Tak |
Port HDBaseT: | Tak |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hikvision DS-2CE56D7T-ITM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kamera monitorująca Hikvision
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
7 Stycznia 2025
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024
Instrukcje Kamera monitorująca
- Kamera monitorująca Watec
- Kamera monitorująca Petcube
- Kamera monitorująca Enabot
- Kamera monitorująca Securetech
- Kamera monitorująca EtiamPro
- Kamera monitorująca SPC
- Kamera monitorująca Linear PRO Access
- Kamera monitorująca Wisenet
- Kamera monitorująca Surveon
- Kamera monitorująca Flir
- Kamera monitorująca Milesight
- Kamera monitorująca Epiphan
- Kamera monitorująca Rostra
- Kamera monitorująca Nedis
- Kamera monitorująca Vivotek
Najnowsze instrukcje dla Kamera monitorująca
28 Stycznia 2025
25 Stycznia 2025
17 Stycznia 2025
17 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025