Instrukcja obsługi Hitachi HAS-WM06
Hitachi
Niesklasyfikowane
HAS-WM06
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi HAS-WM06 (23 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 3.7 gwiazdek
Strona 1/23

ENGLISH
1
Wall mount unit for projectors
Model name HAS-WM06
The following symbols are used in this manual to help you use this product safely and correctly, and to prevent injury
to yourself and others or damage to property. Read through the safety instructions below so you can operate the
product correctly.
WARNING This symbol indicates information that, if ignored, could result in serious personal injury
or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could result in personal injury or
physical damage due to incorrect handling.
Indicates a prohibited action.
This symbol is accompanied by text indicating an action that must not be taken.
Indicates a mandatory action.
This symbol is accompanied by text indicating an action that must be taken.
Table of Contents
Safety Symbols
Thank you for purchasing a wall mount unit specially designed for Hitachi projectors.
Be sure to read this manual and the User’s Manual supplied with the projector before use so you will know how to
LQVWDOOLWSURSHUO\$IWHU\RXKDYH¿QLVKHGUHDGLQJWKHVHGRFXPHQWVSXWWKHPDZD\LQDVDIHSODFHIRUIXWXUHUHIHUHQFH
Disclaimer ................................................ 1
Table of Contents ..................................... 1
Safety Symbols ........................................ 1
Overview ................................................... 2
Installation Precautions .......................... 2
Tools needed for installation .................. 2
To the customer ....................................... 3
To service personnel ............................... 3
Routine Inspections ................................ 3
Contents of this package ........................ 4
Base bracket attachment diagram ......... 5
Sheet projecting distance table .............. 5
Template sheet usage .............................. 6
Installation procedure ............................. 7
1 Wall mounting of the base assembly ......... 7
2 Extending the arm bracket (IN) .................. 8
3 Attaching Adjusting block (D) .................... 8
4
Installation of the vertical adjustment screw (L) of the arm
... 9
5 Mounting of the arm assembly (A) ............. 9
6
,QVWDOODWLRQRIWKHDUP¿[LQJVWUXWVFUHZ.
...10
7 Installation of the strut cover bracket (M) ...10
8 Removal and storage of screws ...............11
9 Attaching bracket (F) .................................11
0 Attaching projector ....................................12
! Connecting cables .....................................12
@
Installation and removal of the cable clamp (S)
...13
Adjustments ............................................14
# Displaying image for making adjustments ...14
$ Image adjustments ....................................15
Installing exterior parts ..........................18
% Procedure for installing exterior parts .......18
^ Attaching the cable cover ..........................19
Adjustment precautions ........................ 20
$GMXVWPHQWVSHFL¿FDWLRQV .................... 21
Applicable models ................................. 22
Ɣ 7KHFRQWHQWRIWKLVPDQXDODQGWKHVSHFL¿FDWLRQVRIWKHSURGXFWLWGHVFULEHVDUHVXEMHFWWR
change without prior notice.
Ɣ 1RWHWKDW+LWDFKLZLOODFFHSWQROLDELOLW\ZKDWVRHYHUIRULQMXULHVDQGGDPDJHVDULVLQJIURP
incorrect use or handling that exceeds normal operating limits.
Disclaimer
User’s Manual

2
HAS-WM06
Installation of this product requires special technical skills. Ask your dealer or service center (for details, see the
User’s Manual supplied with the projector) to handle the installation work.
Be sure to observe the following instructions when installing an projector.
1. Considerable care is required in planning and performing the installation so that it will support the weight of the
projector and wall mount unit. Refer to the table listing applicable models.
2. If the temperature inside the projector gets too high, the temperature sensor will activate and turn off the projector
to prevent damage. Do the following to avoid an abnormally high temperature.
(1) Use the projector within the operating temperature range shown in the User's Manual.
3HULRGLFDOO\FOHDQWKHSURMHFWRU¶VDLULQWDNH¿OWHU)RUGHWDLOVRQKRZRIWHQDQGKRZWRFOHDQWKH¿OWHUVHHWKH
Projector User’s Manual.
,QDGXVW\ORFDWLRQWKH¿OWHUZLOOQHHGPRUHIUHTXHQWFOHDQLQJWKDQLQDERYHVRLQVWDOOWKHSURMHFWRULQD
location where cleaning is easy.
(4) To improve the ventilation at the exhaust port, leave a space of 30cm or more at the sides of the projector.
(5) Do not install the projector in a location exposed to sudden temperature changes, for example near air
conditioners, or where the temperature rises above 40°C.
'RQRWLQVWDOOWKHSURMHFWRULQDVPRNH¿OOHGRUH[WUHPHO\GXVW\HQYLURQPHQWDVWKHWDULQFLJDUHWWHVPRNHZLOO
settle on the optics and lower performance.
4. Do not install the projector in a location where the remote control sensor will be exposed to direct sunlight, other
VWURQJOLJKWVRXUFHVRULQYHUWHUÀXRUHVFHQWODPSOLJKWDWFORVHUDQJHWRSUHYHQWUHPRWHFRQWUROPDOIXQFWLRQ
Ɣ +DYHDWOHDVWHLJKW0DQFKRUEROWVRQKDQGIRUDWWDFKLQJWKHZDOOPRXQW¿[WXUHWRWKHZDOO7KH¿[WXUHKDV
elongated 11mm x 41mm (0.43 × 1.61-inch) holes and 16 elongated 11mm x 33mm (0.43 × 1.61-inch) holes. The
pull-out strength required of the bolts is at least 2,000N per bolt, so determine the appropriate length of bolts
for the strength and thickness of the wall surface in order to meet this standard, and if necessary, increase the
number of bolts.
Installation Precautions
Tools needed for installation
This product is designed to mount a Hitachi projector on a wall.
Overview
Unit: mm (inches)
494.6(19.47)
136(5.35)
270.6(10.65)
430(16.93)
183.4(7.22)
154.2(6.07)
25(0.98) 29.2(1.15)
Mounting holes
11 × 33
oval holes
(16 locations)
(0.43 × 1.29)
11 × 41
oval holes
(12 locations)
(0.43 × 1.61)
11 × 41
oval holes
(12 locations)
(0.43 × 1.61)

ENGLISH
3
HAS-WM06
WARNING
To the customer
Ŷ 'RQRWDWWHPSWWRLQVWDOOWKHSURMHFWRU\RXUVHOI+DYH\RXUGHDOHURUVHUYLFHFHQWHUKDQGOHDOO
installation work. Note that Hitachi will accept no liability whatsoever for accidents or injuries
resulting from an incorrect installation or improper use.
Ŷ 0DNHVXUHWKDWWKHSURMHFWRULVLQVWDOOHGKLJKHQRXJKVRWKDWWKHUHLVQRULVNRISHRSOHEXPSLQJWKHLU
KHDGV,IDVXI¿FLHQWO\KLJKLQVWDOODWLRQFDQQRWEHPDGHEHVXUHWRWDNHWKHQHFHVVDU\SUHFDXWLRQV
when the projector is used.
Ŷ 'RQRWKDQJRQWKHSURMHFWRURUWKHDUPDIWHULQVWDOODWLRQDVWKLVFRXOGFDXVHWKHSURMHFWRUWRIDOO
down or bend the arm resulting in injury or damage.
Ŷ 'RQRWLQVWDOOWKHSURMHFWRULQDORFDWLRQH[SRVHGWRKLJKKXPLGLW\GXVWRUWREDFFRVPRNHRULQD
location exposed to smoke or steam.
Ŷ 'RQRWLQVWDOOWKHSURMHFWRULQDORFDWLRQH[SRVHGWRYLEUDWLRQV
Ŷ $IWHU\RXKDYH¿QLVKHGLQVWDOODWLRQNHHSWKLVPDQXDODQGDFFHVVRULHVLQDVDIHSODFHIRUIXWXUH
reference.
Ŷ 6PDOOSDUWVFRXOGEHVZDOORZHGE\FKLOGUHQDQGSHWVDQGVKRXOGEHNHSWRXWRIWKHLUUHDFK,I\RXU
child swallows any small parts, consult a doctor immediately.
To service personnel
Ŷ 3HUIRUPDOOLQVWDOODWLRQZRUNFRUUHFWO\DFFRUGLQJWRWKLVPDQXDO0DNHVXUHWKDWDOOVSHFL¿HGVFUHZV
and brackets are used in the installation.
Ŷ &RQVLGHUDEOHFDUHLVUHTXLUHGLQSODQQLQJDQGSHUIRUPLQJWKHLQVWDOODWLRQVRWKDWLWZLOOVXSSRUWWKH
weight of the projector and wall mount unit.
Ŷ 1HYHUDWWHPSWWRPRGLI\WKHZDOOPRXQWXQLW:HZLOOQRWJXDUDQWHHWKHVWUHQJWKRIDXQLWWKDWKDV
EHHQPRGL¿HG
Ŷ 0DNHVXUHWKDWDOOVFUHZVDUHWLJKWHQHGWRWKHSURSHUWRUTXHDIWHULQVWDOODWLRQDQGDGMXVWPHQWV7KHUH
must be no loose or over tightened screws.
Ŷ 'RQRWXVHDGKHVLYHVOXEULFDQWVOXEULFDWLQJRLOVRURWKHUFKHPLFDOVGHVLJQHGWRSUHYHQWORRVHQLQJ
of fasteners on screws and bolts used to secure the projector ceiling mount. The use of such
materials could cause the mount to fail and the projector to fall resulting in damage or injury.
Ŷ 5RXWHHOHFWULFFDEOHVDVSUHVFULEHGDQGWDNHFDUHQRWWRGDPDJHWKHPLQWKHLQVWDOODWLRQZRUN
Ŷ %HVXUHWRUHDGWKLVPDQXDODQGWKH8VHU¶V0DQXDORIWKHSURMHFWRUSULRUWRLQVWDOODWLRQWRHQVXUHWKDW
all safety instructions are observed and the projector is correctly installed.
Ŷ %HVXUHWRWXUQRIIWKHSURMHFWRUDQGGLVFRQQHFWWKHSRZHUSOXJIURPWKHZDOORXWOHWEHIRUHVWDUWLQJ
installation work.
Routine Inspections
Like the projector, the wall mount unit should be inspected once a year.
1. Check that the screws in the wall mount unit and adjusted parts are not loose.
2. Check that the wall mount unit, adjusted parts and the set are not scarred or damaged.
Specyfikacje produktu
Marka: | Hitachi |
Kategoria: | Niesklasyfikowane |
Model: | HAS-WM06 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hitachi HAS-WM06, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Hitachi
5 Stycznia 2025
29 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
15 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Kospel
- Niesklasyfikowane Musser
- Niesklasyfikowane Scale Computing
- Niesklasyfikowane WEICON
- Niesklasyfikowane Creamsource
- Niesklasyfikowane Crivit
- Niesklasyfikowane AS Synthesizers
- Niesklasyfikowane Seco-Larm
- Niesklasyfikowane Pro-Ject
- Niesklasyfikowane Simpark
- Niesklasyfikowane Motu
- Niesklasyfikowane Duux
- Niesklasyfikowane Scytek
- Niesklasyfikowane Sanwa
- Niesklasyfikowane Eissound
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025