Instrukcja obsługi Hitachi PDADJ


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi PDADJ (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.9 gwiazdek

Strona 1/5
Page 1 of 5
Mounting Instructions
HITACHI PDADJ PLASMA MOUNT
For sizes 32”, 37”, 42” & 50”
1. Please read your plasma screen instruction manual prior to installation of
this product, carefully noting safety concerns regarding installation
location.
2. Always have 2 people working on the installation
3. Care must be taken, that the wall to be used, is of sufficient strength. Only
fix to solid timber studs, or to brickwork
4. Install wall plate (Part 1) in required position, using heavy duty screws or
concrete anchors. Pay particular attention to keep the plate level.
5. Install cabling, according to your manufacturer’s instructions.
6. Loosen angle adjusting nuts, and pull pivots forward. (see fig 1)
7. Remove the 6mm retaining screws (see fig 2) and lift off parts 3 (see fig 3)
and fix to the back of the TV panel using bolts provided (see fig 4)
8. Employing 2 people, lift the TV panel, and hook onto the pivot brackets.
9. Refit the two 6mm retaining screws into pivot brackets (parts 2& 3)
10. Tilt panel to desired viewing angle (from 0° - 20°) and tighten locknuts
(see fig 1)
11. Finalise all electrical connections.
Page 2 of 5
Parts List
Part 1
Part 2 Part 3 Part 6
Part 4 Part 5
Page 3 of 5
Fig 1
Loosen angle-adjusting nuts (shown in green) on both sides, and pull pivots
forward.
Fig 2
Remove 6mm retaining screws (indicated above in red), which hold parts 2
& 3 together.
Fig 3
Remove part 3, by lifting (as shown above) and fix to the back of the TV
panel, using the bolts provided.


Specyfikacje produktu

Marka: Hitachi
Kategoria: Niesklasyfikowane
Model: PDADJ

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi PDADJ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą