Instrukcja obsługi Honeywell RDWL313P2000
Honeywell
dzwonek do drzwi
RDWL313P2000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell RDWL313P2000 (24 stron) w kategorii dzwonek do drzwi. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.9 gwiazdek
Strona 1/24

Home
RDWL313P2000
Installation and Operation Guide
Plug-In Wireless Doorbell
Preparation
Doorbell
Push
Button
Flat Head
Screws
Phillips Screwdriver
Standard Screwdriver
Push Button Mounting
Bracket
and Adhesive Pad
To install you will needIn the box you will find
The push button supplied with this kit is pre-programmed to operate with the doorbell.
If it is not, see “Connect a Push Button” on page 4.
CR2032
Battery

2
Overview
Just follow these simple steps:
1. Install the push button battery and plug in the doorbell.
2. Set up the doorbell and your preferences.
3. Install the push button.
Indoor use only. Do not expose to liquid, vapor, or rain.
Power-up
1. Choose an outlet location that is not near a heat source,
where the doorbell will be easy to see and hear, and plug
in the doorbell.
2. Open the push button battery cover and install the
CR2032 battery.
Setup and Operation
Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, see “Connect a Push Button” on
page 4.
+
Change the Light Setting
Press the Sunlight button to change the lights that ash
when the doorbell rings.
Press the Sunlight button
1 time 2 times
Top lights only No lights.

3
Change the Tune
Press the Music button to change the
doorbell tune.
Every time you press the Music button,
the tune will change. Stop pressing the
Music button when you hear the tune
you want:
Ding Dong
Westminster
Piano
Fantasy
Soft Alert
Smart Sax
Install Push Button
1. Mount the push button
bracket in the desired
location
Use the screws
–OR–
Use the adhesive backing. If
using the adhesive backing,
clean the surface first.
2. Snap the push button onto
the mounting bracket.
–OR–
Note: If you need to remove the push button, use a small
screwdriver to release the tab.
Adjust the Volume
Press the Volume Up or Volume
Down buttons to adjust the
volume of the Doorbell.
Specyfikacje produktu
Marka: | Honeywell |
Kategoria: | dzwonek do drzwi |
Model: | RDWL313P2000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Honeywell RDWL313P2000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje dzwonek do drzwi Honeywell
30 Września 2024
10 Września 2024
8 Września 2024
6 Września 2024
4 Września 2024
4 Września 2024
2 Września 2024
2 Września 2024
1 Września 2024
31 Sierpnia 2024
Instrukcje dzwonek do drzwi
- dzwonek do drzwi Delta
- dzwonek do drzwi Arendo
- dzwonek do drzwi Merlin
- dzwonek do drzwi Doro
- dzwonek do drzwi Acti
- dzwonek do drzwi Plieger
- dzwonek do drzwi Smart
- dzwonek do drzwi Orbegozo
- dzwonek do drzwi Nexa
- dzwonek do drzwi Techly
- dzwonek do drzwi Mr Safe
- dzwonek do drzwi Infiniton
- dzwonek do drzwi Eken
- dzwonek do drzwi Gira
- dzwonek do drzwi M-e
Najnowsze instrukcje dla dzwonek do drzwi
7 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
12 Marca 2025
22 Lutego 2025
20 Lutego 2025
19 Lutego 2025
4 Lutego 2025