Instrukcja obsługi Hosa ACD-477


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hosa ACD-477 (3 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.3 gwiazdek

Strona 1/3
ACD-477
.
Features
Worldwide Input: AC 100-240v, 50/60Hz,
adjusting automatically
Regulated Output: DC 3-4.5-6-7.5-9-12V,
1200mA max
High Efficiency: More than 80%
Six Adaptor Plugs: For use with most small
home electronic devices
Short Circuit Protection (SCP): Self-protection against short circuit
Innovative Design on Voltage Button Selector
LED Power Indicator
Compact in size, Light in weight, convenient to use, and easy to carry
Instructions
Check the needed voltage on your electronic
device and set the selector switch to the
proper voltage.
Six adaptor plugs are supplied, choose the
one that best fits the external power jack.
Check instructions and rating of the device
and determine the polarity before inserting the
chosen adaptor plug into the external power
jack. See Fig.2 for common symbols for tip
polarity.
Plug the adaptor into a standard electric wall
outlet and operate your device as usual.
CAUTION
It is normal for this unit to generate some heat when working at its maximum capacity
for an extended period of time.
Carefully check and set the DC voltage on the unit. Your device may not work properly
if improper voltage is chosen.
Do Not set the polarity in reverse. Reversed polarity may cause permanent damage to
the device.
Do Not change output voltage when the unit is working to prevent possible damage to
the device.
Disconnect this device IMMEDIATELY from power source to prevent any possible
damage when the device does not operate or when the LED is turned out by its SCP.
Do not open, alter, and or modify this unit.


Specyfikacje produktu

Marka: Hosa
Kategoria: nieskategoryzowany
Model: ACD-477

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hosa ACD-477, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą