Instrukcja obsługi HP ProLiant DL380e G8

HP serwer ProLiant DL380e G8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP ProLiant DL380e G8 (147 stron) w kategorii serwer. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/147

HP ProLiant DL380e Gen8 Server

User Guide

Abstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the

servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Part Number: 676151- 002

November 2012

Edition: 2

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.

Contents 3

Contents

Component identification ............................................................................................................... 7

Front panel components ............................................................................................................................. 7

Front panel LEDs and buttons ............................................................................................................ 9

Rear panel components ............................................................................................................................ 10

Rear panel LEDs and buttons ........................................................................................................... 12

P CIe riser board slot definitions ....................................................................................................... 12

System board components ........................................................................................................................ 13

DIMM slot locations ....................................................................................................................... 14

System maintenance switch ............................................................................................................. 14

NMI header .................................................................................................................................. 15

Drive numbering ..................................................................................................................................... 15

Drive LED definitions ................................................................................................................................ 16

FBWC module LED definitions ................................................................................................................... 17

Fan locations .......................................................................................................................................... 19

T- - 10/T 15 Torx screwdriver ...................................................................................................................... 19

Operations ................................................................................................................................. 20

Power up the server ................................................................................................................................. 20

Power down the server ............................................................................................................................. 20

Extend the server from the rack ................................................................................................................. 20

Remove the server from the rack ................................................................................................................ 22

Remove the security bezel (optional) .......................................................................................................... 23

Remove the access panel.......................................................................................................................... 23

Install the access panel............................................................................................................................. 23

Remove the air baffle ............................................................................................................................... 24

Install the air baffle .................................................................................................................................. 24

Remove the PCI riser cages ....................................................................................................................... 25

Install the PCI riser cages .......................................................................................................................... 26

Setup ......................................................................................................................................... 28

Optional installation services .................................................................................................................... 28

Rack planning resources........................................................................................................................... 28

Optimum environment .............................................................................................................................. 28

Space and airflow requirements ...................................................................................................... 29

Temperature requirements ............................................................................................................... 29

Power requirements ....................................................................................................................... 30

E lectrical grounding requirements .................................................................................................... 30

Connecting a DC power cable to a DC power source ........................................................................ 30

Server warnings and cautions ................................................................................................................... 31

Rack warnings ........................................................................................................................................ 32

Identifying the contents of the server shipping carton.................................................................................... 33

Installing hardware options ....................................................................................................................... 33

Installing the server into the rack ................................................................................................................ 33

Installing the operating system................................................................................................................... 34

Powering on and selecting boot options ..................................................................................................... 35

Registering the server ............................................................................................................................... 36