Instrukcja obsługi Husqvarna 357 XP
Husqvarna
Maszyna do piłowania
357 XP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 357 XP (44 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 5.0 gwiazdek
Strona 1/44
EEEEnnnngggglllliiiisssshhhh
357XP/XPG
, 357XP E-tech
357XPG E-tech
359/G, 359 E-tech, 359G E-tech
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions before using the
machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
WARNING!
Decompression v
alve:
The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Ignition;
choke:
Set the choke control
in the choke position. This should
automatically set the stop switch to the
start position.
Air purge
Adjustment of the oil pump
If your machine bears this symbol
it is equipped with a catalytic
converter.
Chain brake, activated (right)
Chain br ake, not activated
(left)
Other symbols/decals on
the machine refer to special
certification requirements
for certain markets.
Symbols in the operator’
s
manual:
Switch o the engine b
y moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 17
FUEL HANDLING
Fuel
...................................................................... 18
Fuelling ................................................................. 19
Fuel safety ............................................................ 19
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 20
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 22
General working instructions ................................ 22
How to avoid kickback .......................................... 29
MAINTENANCE
Gener
al ................................................................. 30
Carburettor adjustment ......................................... 30
Carburettor with movement limiters ...................... 30
Carburettor without movement limiters ................. 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 33
Muffler .................................................................. 35
Starter .................................................................. 35
Air filter ................................................................. 36
Spark plug ............................................................ 37
Lubricating the bar tip sprocket ............................ 37
Needle bearing lubrication ................................... 37
Adjustment of the oil pump ................................... 37
Cooling system ..................................................... 38
”Air Injection” centrifugal cleaning ........................ 38
Winter use ............................................................ 38
Heated handles .................................................... 39
Maintenance schedule ......................................... 40
T
echnical data
T
echnical data ....................................................... 41
Bar and chain combinations ................................. 42
Saw chain filing and file gauges ........................... 42
EC-declaration of conformity ................................ 43
Specyfikacje produktu
| Marka: | Husqvarna |
| Kategoria: | Maszyna do piłowania |
| Model: | 357 XP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Husqvarna 357 XP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Husqvarna
8 Lutego 2025
12 Stycznia 2025
13 Października 2024
16 Września 2024
12 Września 2024
10 Września 2024
9 Września 2024
7 Września 2024
7 Września 2024
7 Września 2024
Instrukcje Maszyna do piłowania
- Maszyna do piłowania Gude Pro
- Maszyna do piłowania MSW
- Maszyna do piłowania Bosch
- Maszyna do piłowania Toledo
- Maszyna do piłowania Mafell
- Maszyna do piłowania Black & Decker
- Maszyna do piłowania Total
- Maszyna do piłowania Hobart
- Maszyna do piłowania Martha Stewart
- Maszyna do piłowania RIKON
- Maszyna do piłowania Elektra Beckum
- Maszyna do piłowania Verto
- Maszyna do piłowania Wolfcraft
- Maszyna do piłowania Westfalia
- Maszyna do piłowania Kraftronic
Najnowsze instrukcje dla Maszyna do piłowania
3 Kwietnia 2025
3 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025