Instrukcja obsługi IFM E33123


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E33123 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.6 gwiazdek

Strona 1/3
Installation Instructions
Adapter with Aseptoflex thread
E3xxxx
704939/01 05/2011
UK
2
The adapter is delivered with EPDM
O-ring fitted.
O-rings are also available as acces-
sories:
- Order no. E30053 (5 pcs. Viton
O-rings).
- Order no. E30054 5 pcs. EPDM
O-rings).
Installation: Place the O-ring (A)
in the groove (B) of the adapter.
It must snap flush into the groove
over its whole circumference.
B
A
Remove the O-ring (C) supplied
with the sensor
Grease the following parts with suit-
able paste (1):
- thread and sealing areas of the
sensor.
- sealing areas and O-ring (A) of the
adapter.
The paste must be suitable and ap-
proved for the application and compat-
ible with the elastomers used.
A
C
1
Screw the sensor into the adapter
until it is hand-tight. Do not damage
the sealing chamfers.
I
3
UK
Clamp sensor and adapter into a
clamping device (D). The sealing
chamfers (E) must not be damaged.
Tighten the sensor using a spanner
until you can feel the end stop
Note: Do not overtighten. This can
have an adverse effect on the sealing.
D
E
Hand tighten the eccentric element
(G) on the adapter with the screw
(F).
F
G
Fix the sensor with the eccentric
element and tighten the socket
head screw.
Mount sensor + adapter to the process connection by means of a clamp.
The sensor and adapter assembly must be installed so that the adapter can prop-
erly drain during cleaning.


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: E33123

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E33123, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą