Instrukcja obsługi IFM O4P501


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM O4P501 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.7 gwiazdek

Strona 1/5
Operating instructions
Retro-reflective sensor
O4P5xx
706275 / 00 11 / 2012
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-
sor detects objects and materials without contact and indicates their presence by
a switching signal.
Range: (→ type label).
3 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1
2
3
1: LED
2: [OUT on] button
3: [OUT off] button
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:
Connector
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load
Cable



BN = L+
BU = L-
BK = load
Core colours: BN = brown, BU = blue, BK = black


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: O4P501

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM O4P501, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą