Instrukcja obsługi IFM OGP300
IFM
Niesklasyfikowane
OGP300
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM OGP300 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.9 gwiazdek
Strona 1/3

Operating instructions
Retro-reflective sensor
OGP3xx
UK
UK
UK
UK
UK
704459 / 01 01 / 2009

2
1 Preliminary note
1.1 Symbols used
►Instruction
> Reaction, result
→Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switching signal.
Range: ( type label).→
3 Installation
1
LED1:
Fit the prismatic reflector or the reflective tape behind the object to be detected. ►
Align the retro-reflective sensor to it and secure it to a bracket. ►
Maximum range only with accurate alignment.

3
UK
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of ►
electrical equipment must be adhered to.
Ensure voltage supply to EN 50178. ►
Disconnect power. ►
Connect the unit as follows: ►
Connector
L+
L
1
4
3
pin 1 = L+
(pin 2 = not connected)
pin 3 = L-
pin 4 = load
Cable
BN
BK
BU
L+
L
BN = L+
BU = L-
BK = load
Core colours: BN = brown, BU = blue, BK = black
5 Operation
Check whether the unit operates correctly. ►
Dark-on switching units (OGP-DPKG): the output is switched / the yellow LED •
is lit when an object is detected.
Light-on switching units (OGP-HPKG): the output is switched / the yellow LED •
is lit when no object is detected.
9 Maintenance, repair and disposal
Keep the front lens of the sensor free from soiling. ►
For cleaning do not use any solvents or cleaning agents which could damage ►
the plastic material.
Technical data and further information at
www.ifm.com Select your country Data sheet direct:→ →
Specyfikacje produktu
Marka: | IFM |
Kategoria: | Niesklasyfikowane |
Model: | OGP300 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z IFM OGP300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane IFM
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Martens
- Niesklasyfikowane Technoline
- Niesklasyfikowane Tamron
- Niesklasyfikowane Elinchrom
- Niesklasyfikowane Ewent
- Niesklasyfikowane Airman
- Niesklasyfikowane Statron
- Niesklasyfikowane Kenwood
- Niesklasyfikowane Point 65
- Niesklasyfikowane Mettler
- Niesklasyfikowane Life Fitness
- Niesklasyfikowane Franklin
- Niesklasyfikowane ProForm
- Niesklasyfikowane Noise Engineering
- Niesklasyfikowane ICU
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025