Instrukcja obsługi IFM PI2096


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM PI2096 (21 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 3.5 gwiazdek

Strona 1/21
Operating instructions
Electronic pressure sensor
PI209x
11426177 / 00 11 / 2021
UK
2
Contents
1 Preliminary note 3
���������������������������������������������������������������������������������������������������
1�1 Symbols used 3
������������������������������������������������������������������������������������������������
2 Safety instructions 3
�����������������������������������������������������������������������������������������������
3 Functions and features 4
����������������������������������������������������������������������������������������
3�1 Applications ���������������������������������������������������������������������������������������������������
4
4 Function ���������������������������������������������������������������������������������������������������������������
4
4�1 Processing of the measured signals 4
��������������������������������������������������������������
4�2 Pressure monitoring / switching function 5
�������������������������������������������������������
4�3 Pressure monitoring/ analogue function 5
��������������������������������������������������������
4�4 Diagnostic function 7
����������������������������������������������������������������������������������������
5 Installation������������������������������������������������������������������������������������������������������������8
6 Electrical connection 10
������������������������������������������������������������������������������������������
7 Operating and display elements ������������������������������������������������������������������������
11
8 Menu ������������������������������������������������������������������������������������������������������������������
12
8�1 Menu structure 12
���������������������������������������������������������������������������������������������
8�2 Menu explanation 13
���������������������������������������������������������������������������������������
9 Parameter setting 14
����������������������������������������������������������������������������������������������
9�1 Parameter setting general 14
���������������������������������������������������������������������������
9�2 Configuring the display (optional) 16
����������������������������������������������������������������
9�3 Setting the output signal 16
������������������������������������������������������������������������������
9�3�1 Setting the output function 16
������������������������������������������������������������������
9�3�2 Setting the switching limits 17
�����������������������������������������������������������������
9�3�3 Scaling the analogue value 17
����������������������������������������������������������������
9�4 User settings (optional) 18
��������������������������������������������������������������������������������
9�4�1 Zero-point calibration 18
��������������������������������������������������������������������������
9�4�2 Setting the delay time for OUT1 18
���������������������������������������������������������
9�4�3 Setting the output polarity for OUT1 18
���������������������������������������������������
9�4�4 Setting the damping for the switching signal 18
��������������������������������������
9�4�5 Setting the damping for the analogue signal 18
��������������������������������������
9�5 Service functions 19
�����������������������������������������������������������������������������������������
9�5�1 Reading the min�/max� values for the system pressure 19
����������������������
9�5�2 Reset all parameters to the factory setting 19
�����������������������������������������
3
UK
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of buttons, switches or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference�
2 Safety instructions
The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
Read this document before setting up the product and keep it during the entire
service life�
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
Only use the product for its intended purpose (→ Functions and features).
Only use the product for permissible media (→ Technical data).
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur
10 Operation ���������������������������������������������������������������������������������������������������������
19
10�1 Read the set parameter values 19
�����������������������������������������������������������������
10�2 Fault indication 19
������������������������������������������������������������������������������������������
10�3 Cleaning of the filter cover 20
�������������������������������������������������������������������������
11 Factory setting 21
�������������������������������������������������������������������������������������������������


Specyfikacje produktu

Marka: IFM
Kategoria: Niesklasyfikowane
Model: PI2096

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM PI2096, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą