Instrukcja obsługi IFM PIM093
IFM
Niesklasyfikowane
PIM093
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM PIM093 (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/11

Operating instructions
Combined sensor for pump diagnosis
and pressure monitoring
PIM093
PIM094
UK
11426175 / 00 11 / 2021

2
Contents
1 1 Preliminary note 3 ������������������������������������������������������������������������������������������������
1�1 Symbols used 3 ������������������������������������������������������������������������������������������������
2 Safety instructions 3 �����������������������������������������������������������������������������������������������
3 Brief instructions 4 �������������������������������������������������������������������������������������������������
4 Functions and features 6 ����������������������������������������������������������������������������������������
5 Function ���������������������������������������������������������������������������������������������������������������6
5�1 Processing of the measured signals 6 ��������������������������������������������������������������
5�2 Pump monitoring 7 �������������������������������������������������������������������������������������������
5�3 Pressure monitoring/ analogue function 8 ��������������������������������������������������������
5�4 Pressure monitoring / switching function 9 �������������������������������������������������������
6 Installation����������������������������������������������������������������������������������������������������������10
7 Electrical connection 12 ������������������������������������������������������������������������������������������
8 Operating and display elements 13 ������������������������������������������������������������������������
9 Menu ������������������������������������������������������������������������������������������������������������������14
9�1 Menu structure 14 ���������������������������������������������������������������������������������������������
9�2 Menu explanation 15 ���������������������������������������������������������������������������������������
10 Parameter setting 16 ��������������������������������������������������������������������������������������������
10�1 Parameter setting general 16 �������������������������������������������������������������������������
10�2 Configuring unit for pump diagnosis 18 ����������������������������������������������������������
10�3 Configuring unit for pressure monitoring 20 ���������������������������������������������������
10�4 User settings (optional) 21 �����������������������������������������������������������������������������
10�5 Service functions 22 ���������������������������������������������������������������������������������������
11 Operation ���������������������������������������������������������������������������������������������������������22
11�1 Read the set parameter values 22 ������������������������������������������������������������������
11�2 Changing the display in the Run mode 23 ������������������������������������������������������
11�3 Fault indication 23 �������������������������������������������������������������������������������������������
12 Setting ranges��������������������������������������������������������������������������������������������������24
13 14 Factory setting 25 ��������������������������������������������������������������������������������������������

6
4 Functions and features
The unit monitors the operating state of pumps and the system pressure of ma-
chines and installations�
Applications
Type of pressure: relative pressure
Information on pressure rating and bursting pressure → data sheet.
Static and dynamic overpressures exceeding the indicated overload pres-
sure are to be avoided by taking appropriate measures�
The indicated bursting pressure must not be exceeded� Even if the
bursting pressure is exceeded only for a short time, the unit can be destro-
yed� NOTE: Risk of injury!
5 Function
5.1 Processing of the measured signals
• The unit analyses the pulsation characteristics of the pump and signals the
deviations from the basic characteristic determined for normal operation�
• It detects the system pressure and evaluates the measuring signal�
2 outputs are available for the signal output:
• Output 1:
- Signal for pump diagnosis; adjustable window function, normally open or
normally closed�
• Output 2:
2 configuration options:
- Analogue signal proportional to the pressure (4���20 mA or 20���4 mA, scalea-
ble)�
- Switching signal for the system pressure; adjustable to hysteresis or window
function, normally open or normally closed�
Specyfikacje produktu
Marka: | IFM |
Kategoria: | Niesklasyfikowane |
Model: | PIM093 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z IFM PIM093, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane IFM
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Babyzen
- Niesklasyfikowane Brinno
- Niesklasyfikowane Dymond
- Niesklasyfikowane SRS
- Niesklasyfikowane Speco Technologies
- Niesklasyfikowane Newland
- Niesklasyfikowane Sennheiser
- Niesklasyfikowane Duronic
- Niesklasyfikowane Autel
- Niesklasyfikowane Bikemate
- Niesklasyfikowane Sunbeam
- Niesklasyfikowane Waterstone
- Niesklasyfikowane Apelson
- Niesklasyfikowane IOptron
- Niesklasyfikowane Garmin
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025