Instrukcja obsługi Inovonics EN1244

Inovonics czujnik dymu EN1244

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Inovonics EN1244 (4 stron) w kategorii czujnik dymu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/4

11.10.16 06755A © Inovonics, 2016 - www.inovonics.com

EN1244/EN1244-60/EN1244A/EN1244Z

Wireless Smoke Detector

Installation Instructions

1 Overview

The wireless smoke detector features an onboard sounder, a smoke

sensor, an LED indicator and local test capability to allow the user total

visibility of its functionality. It is self-monitoring, alerting the user when

sensor maintenance is needed or batteries are low, and automatically

supervising the radio link.

The EN1244 and EN1244-60 wireless smoke detector have been designed

for operation in the United States; the EN1244A wireless smoke detector

has been designed for operation in Australia; and the EN1244Z wireless

smoke detector has been designed for operation in New Zealand.

The EN1244 wireless smoke detector is intended for open area protection

and for connection to a compatible power supply or control unit for

operation as part of a household re alarm system (UL985).

Note: For UL 2560 installations, refer to the EN6080 Area Control

Gateway Installation Instructions.

1.1 Maximum Number of Repeaters for a UL 2560

Installation

To achieve the 99.99% alarm message reliability required for UL 2560

compliance, system installations must operate within the following limits for

end device and repeater counts.

1.2 Inovonics Contact Information

If you have any problems with this procedure, contact Inovonics technical

services:

• E-mail: support@inovonics.com.

• Phone: (800) 782-2709; (303) 939-9336.

1.3 Wireless Smoke Detector External Components

Figure 1 Wireless smoke detector external components

Device Indicators

1.4 What’s In The Carton

• One 3V-Lithium battery, installed.

• Two drywall anchors.

• Two mounting screws.

2 Installation and Startup

2.1 Installation Notes

• These products are designed to be maintained by professional

security technicians.

• Products are tested for indoor use.

• All products should be manually tested weekly.

End

Devices

Maximum

Repeaters

150 397

250 386

350 375

500 360

1000 313

2000 238

3000 184

For product and installation videos visit us at

www.inovonics.com/videos or use the QR

code below.

Green LED Red LED Sounder

Power up Both LEDs

blink every 5

seconds

Both LEDs

blink every

5 seconds

Off

Normal

(standby)

Blinks every

10 seconds

Off Off

Sensitivity out of

range

Off Blinks

every five

seconds

Off

Smoke alarm Off Lit Temporal

pattern

Low battery Off Blinks

every 45

seconds

Chirps every

45 seconds

beginning two

days after the

LED begins

blinking

Test

button

Green

LED

Red

LED

Specyfikacje produktu

Marka:	Inovonics
Kategoria:	czujnik dymu
Model:	EN1244
Kolor produktu:	Biały
Nadaje się do użytku w pomieszczeniach:	Tak
Źródło zasilania:	Bateria
Wysokość produktu:	58 mm
Waga produktu:	240 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	Federal Communications Commission (FCC), RoHS
Technologia łączności:	Bezprzewodowy
Ilość:	1
Zakres temperatur (eksploatacja):	0 - 50 °C
Zakres wilgotności względnej:	0 - 95 %
Rodzaj baterii:	CR123A
Diody LED:	Tak
Typ mocowania:	Montowane na powierzchni
Szerokość pasma:	928 MHz
Czas eksploatacji baterii:	5 lat(a)
Najlepsze zastosowania:	Home, Office
Średnica:	134.6 mm
Typ czujnika:	Detektor tlenku węgla
Urządzenia alarmujące o decybelach:	85 dB
Interconnectable:	Tak
Prąd roboczy:	12 µA