Instrukcja obsługi Insignia NS-S10CCBK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Insignia NS-S10CCBK (2 stron) w kategorii Niszczarka do papieru. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 5 użytkowników na średnio 4.1 gwiazdek

OverheatDoor open

PowerOverload

FWDREV

OFFAUTO

Switch

LED indicators

SETTING UP YOUR SHREDDER

1Place the wastebasket upright on a level surface.

2Attach the shredder head to the basket. Make sure that it

ts properly.

3Place the wastebasket securely in the shredder.

Note: Do not use plastic bags to line the wastebasket.

4Connect the power cord to a power outlet. Do not use an

extension cord.

USING YOUR SHREDDER

1Unpack your shredder, then place it upright on a level

surface.

2Make sure that the shredder head is correctly tted onto

the basket.

3Plug the power cord into a standard (120 V AC) outlet. Do

not use an extension cord.

4Slide the power switch to AUTO.

5Insert paper (up to 10 pages) or one credit card or disc into

the shredding slot. Your shredder automatically shreds

what you insert.

Note: Don’t put envelopes, adhesive material, newsprint,

transparencies, laminated documents, continuous forms,

cardboard, or hard and plastic materials (except credit cards)

through the shredder. You can shred small staples and small

paper clips.

6If the shredder jams, slide the switch to REV to return the

paper, then slide the switch to . The shredder can be AUTO

used again if the jam is cleared.

7When the wastebasket is 2/3 full, slide the switch to OFF,

unplug the cord from the power outlet, then lift up and

empty the wastebasket.

PACKAGE CONTENTS

• Cross cut shredder with wastebasket

• Quick Setup Guide

FEATURES

• Shreds up to 10 sheets of paper at one time

• Destroys credit cards, compact discs, small staples, and

small paper clips

• Cross-cut size .2 × 1.4 in. (4 × 35 mm) protects sensitive

data

• 5.6 gal (21 L) capacity basket holds shredded waste and is

easy to empty

Before using your new product, please read these instructions to prevent any damage.

QUICK SETUP GUIDE

10-sheet Cross Cut

Shredder

NS-S10CCBK / NS-S10CCBK-C

# ITEM

1Handle

2Switch

3LED

indicators

4Shredding

slot

5Window

6Wastebasket

DESCRIPTION

Lets you easily lift up the shredder head

to empty the paper inside the waste

basket. Make sure that your shredder is

turned o before you move it.

FWD: Sends an item through your

shredder. The POWER indicator lights

green.

Note: When you slide the power switch to

FWD, the cutters run forward continuously.

To stop the cutters, you have to move the

switch to a dierent position.

We recommend that you only use FWD to

make sure that the remaining paper in slot

gets shredded or you want you clear the slot.

AUTO: Automatically shreds an item

when inserted into the shredding slot.

The POWER indicator lights green. After

shredding, the shredding stops

automatically.

OFF: Turns o your shredder.

REV: Reverses the paper in the slot to

clear a jam or remove unshredded paper.

Overheat: Lights when your shredder

has overheated. If this indicator is on, the

machine stops shredding, and recovers

when the indicator is o. The cool down

time is at least 30 minutes.

Overload: Lights when trying to shred

over the maximum 10 sheets or when

the paper is folded. In overload, the

cutter turns o automatically.

Power: Lights when your shredder is in

use.

Door open: Lights when the shredder

head is not on the wastebasket or when

the head is not in the correct position on

the wastebasket.

Insert up to 10 sheets of paper at a time

or one credit card or disc at a time.

Lets you see how much shredded

material is in the wastebasket.

Holds the paper, cards, and discs that

you have shredded. Empty the basket

when it is 2/3 full.

AUTO

REV

Specyfikacje produktu