Instrukcja obsługi Intel SC5295WS

Intel Niesklasyfikowane SC5295WS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intel SC5295WS (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/1

*D13317-001*

D13317-001

Intel® Server Board Guide

Intel® Server BoardProduct Code

SE7230NH1-E

SE7320EP2, SE7520BD2

SE7525RP2

SE7320EP2, SE7520BD2

SC5295UP

SC5295DP

SC5295WS

SC5295BRP

Tools Required

Anti-static

wrist strap

Phillips*

screwdriver

Caution



Observe normal ESD

(Electrostatic Discharge)

procedures during

system integration to avoid

possible damage to server board

and/or other components.



Installation and service

 of this product to be

 performed only by

qualified service personnel to

avoid risk of injury from

electrical shock or energy hazard.

Warning

Read all caution and safety statements in this document before performing any of the instructions. Also see the Intel

Server Board and Server

Chassis Safety Information document at: for complete safety information.http://support.intel.com/support/motherboards/server/sb/cs-010770.htm

Thank you for buying the Intel® Entry Server Chassis SC5295-E.

The following information will help you to prepare your chassis

for integration with your selected Intel® Server Board.

These guides and other supporting documents (including

a list of supported server boards) are located on the web at

http://support.intel.com/support/motherboards/server.

If you are not familiar with ESD (Electrostatic Discharge) procedures used during system

integration, please see the Intel® Entry Server Chassis SC5295-E User Guide, available on

the CD or at http://support.intel.com/go/serverbuilder.

Intel® Entry Server Chassis SC5295-E

UP/DP/WS/BRP

Quick Start User's Guide

Building Value With Intel

Server Products, Programs and Support

Get the high-value server solutions you need by

taking advantage of the outstanding value Intel

provides to system integrators:

•High-quality server building blocks

•Extensive breadth of server building blocks

•Solutions and tools to enable e-Business

•Intel® Server Management

•Comprehensive training services

•Worldwide 24x7 technical support

 [AT&T Country Code + 866-655-6565]

•World-class service, including a three-year

 limited warranty and Advanced Warranty

 Replacement1

•Product information, including product

 briefs and technical product

 specifications

•Sales tools, such as videos and

 presentations

•Training information, such as the Intel®

 Online Learning Center

•Support Information and much more

Intel® ServerBuilder is your one-stop shop

for information about all of Intel's Server

Building Blocks such as:

For more information on Intel's added-value

server offerings, visit the Intel® ServerBuilder

website at: www.intel.com/go/serverbuilder

1Available only to Intel® Channel Program

Members, part of the Intel® e-Business Network.

Preliminary Draft

Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2005, Intel Corporation. All rights reserved.

Install Server Board

Large

Duct

Note: Save these

screws.

Small Duct

Server

Board

Tab

engages

here

Remove the small duct (one screw).

Remove the large duct (two screws).

Part A: Remove CPU Ducts

Note: The SC5295UP version of the Entry Server Chassis

SC5295-E does NOT have any CPU ducts to remove or

install. You will only need to remove and install CPU ducts

IF you have a SC5295DP, SC5295WS, or SC5295BRP.

Note: The CPU ducts must be removed prior to

installing the server board.

Part B: Install Server Board

Open the Intel® Server Board box. Follow the

instructions in the enclosed Intel

® Server

Board Quick Start User's Guide and return

to this document when finished.

Use the mounting screws, bumpers and

standoffs (if necessary) that came with your

chassis to secure the server board to

the chassis.

See your Intel® Server Board Quick Start

User's Guide for server board installation

instructions and installation of the back panel

I/O shield.

Part C: Install CPU Ducts

Lower the large CPU duct into chassis and line

up with two mounting holes in chassis.

Note: Tab on small CPU duct must engage

corresponding opening in large CPU duct.

3Lower the small CPU duct into chassis and line

up with mounting hole in chassis.

4Attach to chassis using the single screw you

saved from Part A.

Attach to chassis using the two screws you saved

from Part A.

Only required for Intel® Server Boards

SE7320EP2 and SE7525RP2:

DO NOT USE with a Passive Thermal Solution or the

Intel® Workstation Cooling Kit.

This duct should only

be used with Active

Thermal Solutions.

Remove PCI Card Guide

Press in on two blue

tabs.

Pull PCI Card Guide

outward and

remove from

chassis.

Remove System Fan

Press two bracket tabs outward and remove

system fan.

Install Floppy Drive

3Insert floppy drive into Device Bay

until it is in position.

2Move latch to "unlock" position.

1Remove the EMI Shield from

the 3.5-in Device Drive Bay.

5Connect power and data cables to

the rear of the floppy drive.

4Move latch to the "lock" position.

4Install CD-ROM or DVD-ROM Drive

3Insert CD-ROM or DVD-ROM drive

into Device Drive Bay until it is

in position.

2Move latch to the "unlock" position.

1Remove the EMI Shield from the

5.25-in Device Drive Bay.

5Connect power and data cables to

the rear of the CD-ROM or DVD-ROM

drive.

4Move latch to the "lock" position.

Remove Hard Drive Cage

3Push the blue plastic

release mechanism

upward to unlatch the

hard drive cage.

2Remove shipping screw.

1Loosen thumb screw and remove

hard drive cage EMI shield.

Once released, pull the

hard drive cage out of the

chassis.

Remove Front Bezel Assembly

3Disengage three bezel clips that attach the right side

of the bezel to the right side of the chassis and remove.

2Rotate left side of front bezel assembly outward slightly.

1Disengage two bezel tabs from leftside of chassis.

Remove Side Cover

Remove two shipping screws.

Push in latch.

3Slide side cover rearward and remove.

Specyfikacje produktu

Marka:	Intel
Kategoria:	Niesklasyfikowane
Model:	SC5295WS
Kolor produktu:	Czarny
Wysokość produktu:	452 mm
Szerokość produktu:	236 mm
Głębokość produktu:	483 mm
Certyfikaty:	UL1950-CSA950, EN60 950, IEC60-950, CE-Low, EMKO-TSE, FCC, ICES-003, CISPR22, 3rd, EN45022, EN45024, EN6100-3-2&-3\nCE-EMC(89/33/EEC), VCCI, RRL, BSMI
Zakres temperatur (eksploatacja):	10 - 35 °C
Zakres wilgotności względnej:	8 - 90 %
Układ:	Full Tower
Liczba portów USB 2.0:	1
Zakres temperatur (przechowywanie):	-40 - 70 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Model:	Serwer
Zasilanie:	600 W
Typ zasilacza:	PFC
Możliwości montowania w stelażu:	Tak
Pojemność stelaża:	5U
Szeregowe porty komunikacyjne:	1
Gniazdo rozszerzeń:	7x
Wentylator:	2
Wspomagane Interfejsy HDD:	SAS