Instrukcja obsługi Intellinet 508247

Intellinet nieskategoryzowany 508247

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 508247 (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Important: Read before use. • Importante: Leer antes de usar.

intellinetnetwork.com

4-Port Gigabit Ethernet

Industrial Switch with 2 SFP

Ports Instructions

Model 508247 (IIS-4G02)

The Intellinet 4-Port Gigabit Ethernet Industrial Switch with 2 SFP Ports offers an

array of time-saving, cost-effective features while providing superior network

throughput. No configuration is required and installation is plug and play.

For specifications, visit intelllinetnetwork.com/barcode/508247.

Features

• IP40 slim-type metal housing to withstand harsh industrial conditions

• Wide operating temperature: -40 – 75°C (-40 – 167°F)

• Option for DIN-rail installation

• Two small form-factor pluggable GBIC module slots (SFP)

• Two redundant DC inputs (12 – 48 V) with I/O terminal block

With a backplane speed of 12 Gbps, plenty of performance is available for

your computers, servers and other networking devices. Each of the ports

automatically senses the link speed of the connected network device and adjusts

to 10, 100 or 1000 Mbps for compatibility and maximum performance.

Front Panel

LED Color Status Status Description

PWR Green On Power on

Off Power off

Ports

1 – 4 /

SFP

1 & 2

Green

On Valid port connection

Blinking Sending or receiving data

Off No link established

English

Instructions 4-Port Gigabit Ethernet Industrial Switch with 2 SFP Ports

Power

Terminal Block Installation

NOTE: Ensure all power is off/disconnected before beginning!

1 Loosen appropriate screws.

2 Insert bare power-supply wires into appropriate terminal slots (positive

wire into positive slot; negative wire into negative slot).

3 Tighten appropriate screws to secure wires. (If desired,

repeat steps 1 – 3 on second input pair.)

4 Install block into the device and tighten screws.

Placement

Desktop Installation

Prior to use, place/position the switch:

• on a level surface with at least 25 mm (approx. 1”) of clearance for ventilation

• away from sources of electrical noise: radios, transmitters, broadband amplifiers

within 100 m (approx. 328’) of network devices it’s to be connected to.

DIN-Rail Installation

1 With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.

2 Push device in till it clicks into place.

1 2 3 4

1 2

Instructions

English

4-Port Gigabit Ethernet Industrial Switch with 2 SFP Ports

Specyfikacje produktu

Marka:	Intellinet
Kategoria:	nieskategoryzowany
Model:	508247
Kolor produktu:	Brązowy
Typ produktu:	Zestaw słuchawkowy
Styl noszenia:	Opaska na głowę
Typ zestawu słuchawkowego:	Stereofoniczny
Technologia łączności:	Przewodowa
Budowa słuchawek:	Supra fonetyczny
Pasmo przenoszenia:	20 - 20000 Hz
Impedancja:	32 Ω
Czułość słuchawek:	100 dB
Średnica głośnika:	30 mm
Liczba przycisków:	1
Walizka:	Tak
Możliwość złożenia:	Tak
Maksymalna moc wejścia:	30 mW