Instrukcja obsługi Intellinet 711951


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intellinet 711951 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.6 gwiazdek

Strona 1/2
M6
Attention:
e
M6
19 FLAT PACK
RACK CABINET
ASSEMBLY
INSTRUCTIONS
North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677
USA
Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221
Taiwan
Europe
IC Intracom Europe
Löhbacher Str. 7
D-58553 Halver
Germany
© IC Intracom. All rights reserved. Intellinet is a trademark of IC Intracom, registered in the U.S. and other countries. For specifications, go to intellinet-network.com. For warranty information, go to intellinet-network.com/warranty.
1 Front door
2 Front frame
3 Side frame x2
4 Side panel x2
5 Top
6 Back frame
7 Mounting rail x2
8 Bottom
Remove the side panels ( ) from the side 4
frames ( ) and set them aside.3
1 2 Use the included key to pull open the
door ( ) and remove it from the front 1
frame ( ) by pushing down on the latch.2
3 Use the 4 included M5 screws to attach a
mounting rail ( ) to each side frame ( ).7 3
4 Use 4 of the included M6 screws (use 6 for
larger units) to attach each of the 2 side
frames ( ) to the back frame ( ).3 6
5 Slide the top ( ) and the bottom ( ) into 5 8
place.
Note: screws
to the front
6 Use 4 of the included M6 screws (use 6 for
larger units) to attach the front frame ( ) 2
to the assembly.
7 Install the 2 side panels ( ).4
8 Reverse Step 2 by inserting the lower
door latch into the frame and then
pushing down on the upper door latch
to install the front door ( ). Note: Once 1
the unit is assembled, check that all
corners are square to ensure that the
door opens and closes properly.
Wallmount Cabinet instructions ICG.indd 1 7/30/14 2:22 PM
M6
Attention:
de
M6
19 FLAT PACK
WANDVERTEILER
MONTAGE-
ANLEITUNG
Die Spezifikationen finden Sie auf intellinet-network.com.. Garantieinformationen finden Sie hier unter intellinet-network.com/warranty.
1 Fronttür
2 Frontrahmen
3 Seitenrahmen x2
4 Seitenwand x2
5 Oberseite
6 Rückseitiger Rahmen
7 Montageschienen x2
8 Bodenplatte
Nehmen Sie die Seitenwände ( ) vom 4
Seitenrahmen ( ) ab und legen Sie sie zur 3
Seite.
1 2 Öffnen Sie die Tür ( ) mit dem 1
beiliegenden Schlüssel und nehmen Sie
sie vom Frontrahmen ( ) ab, indem Sie 2
den Scharnierstift nach unten drücken.
3 Verwenden Sie 4 beiliegende M5-
Schrauben, um eine Montageschiene ( ) 7
an jedem Seitenrahmen ( ) zu befestigen.3
4 Verwenden Sie 4 beiliegende M6-Schrauben
(6 für größere Schränke), um die beiden
Seitenrahmen ( ) jeweils am rückseitigen 3
Rahmen ( ) zu befestigen.6
5 Schieben Sie die Oberseite ( ) und die 5
Bodenplatte ( ) in Position.8
Hinweis:
Schrauben
nach vorn
6 Verwenden Sie 4 beiliegende M6-
Schrauben (6 für größere Schränke), um
den Frontrahmen ( ) an der Konstruktion 2
zu befestigen.
7 Montieren Sie die 2 Seitenwände ( ).4
8 Setzen Sie die Tür ( ) aus Schritt 2 1
wieder ein, indem Sie den unteren
Scharnierstift unten im Rahmen platz-
ieren und den oberen an der Oberseite
einsetzen. Hinweis: Sobald der Schrank
montiert ist, prüfen Sie, dass alle Ecken
genau rechtwinklig verbaut sind, damit
die Tür ordnungsgemäß geöffnet und
geschlossen werden kann.
Wallmount Cabinet instructions ICG.indd 2 7/30/14 2:22 PM


Specyfikacje produktu

Marka: Intellinet
Kategoria: Niesklasyfikowane
Model: 711951

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Intellinet 711951, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą