Instrukcja obsługi Intermatic PF1102

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intermatic PF1102 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 5.0 gwiazdek

INSTALLATION

OPERATION &

SERVICE MANUAL

Model: PF1102 FREEZE PROTECTION CONTROL

IN RAINPROOF (TYPE 3R) ENCLOSURE

Model: PF1102M FREEZE PROTECTION CONTROL MECHANISM

SUITABLE FOR POOL/SPA EQUIPMENT CONTROL

INPUT VOLTAGE: 240 VOLT - 60 HZ.

ELECTRICAL RATING: 3 HP - 240 VOLT AC.

DANGER! To Reduce the Risk of Injury:

...do not permit children to operate the Control Unit or use the Pool/Spa unless they are closely supervised at all times.

...test GROUND FAULT protection regularly. If it fails to reset, DO NOT USE THE POOLor SPA! Contact a qualified

service technician.

...always disconnect electricity before servicing this control or the equipment(s) connected to it. THIS CONTROLIS NOT

TO BE USED AS APOWER DISCONNECT.

READ, FOLLOW & SAVE THIS INSTRUCTION MANUAL

GENERALINFORMATION

Model PF1102Freeze Protection Control is self-contained in an indoor-outdoor, beige, rainproof

enclosure and designed to be connected to a timing or switching device. Together, they control as well

as protect the Pool/Spa equipment and

plumbing against freeze damage. The Control,

if wired according to instructions, turns ON

the Filter Pump when the air

temperature (where this Control is

located) drops below the temperature

set by the thermostat dial (between

32˚F and 45˚F). Nevertheless, the

Control is not intended to be a

substitute for the insulation, coverings or

maintenance.

Model PF1102Mis a mechanism only,

functions just like Model PF1102 and

fits (snaps into) any Intermatic Pool

Panel, Models T10000R, T30000R or

T40000R Series. Both models are

designed to operate on 240 Volt, 60

cycle only.

FREEZE PROTECTION

FOR POOLS, SPAS

AND WATER FEATURES

By

Specyfikacje produktu