Instrukcja obsługi Joranalogue Select 2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joranalogue Select 2 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
SELECT 2
DUAL GATED CONTROL PRECISION
VOLTAGE PROCESSOR
1
INTRODUC TIO N
A 'Swiss Army knife' for your modular system,
Select -2 provides two highly accurate gate
controlled voltage processors in 6 HP. These
allow you to create, switch, mute, hold, invert,
attenuate voltages, , offset, add/ and subtractmix
from slow control voltages (CVs) up to audio
frequencies.
Each processor features two signal inputs, with
the left input used by default. A gate on the
'select' input switches to the right signal input
instead. The signal inputs are normalised to the
precision +5 V reference (left) and 0 V (right).
Following the input section is a hold circuit. A
rising edge on the 'hold' input freezes the input
voltage at that moment, until the gate input
goes low again. While most sample/track- -and
hold modules only manage a few seconds,
Select 2 ’s ‘low droop’ design enables it to store a
held voltage accurately for several minutes.
The end of the signal path consists of a gated
polariser/attenuverter. Using the knob, the
voltage at the output can attenuated and/or
inverted: the gain is −1 (inverted) at the minimum
setting, 0 at the centre and 1 (unity gain) at the +
maximum. The polariser can be disabled using
the 'unity' gate input. This unique ability enables
a variety of interesting gate-controlled signal
modulations. Dual-colour LEDs show the output
voltage of each processor.
Finally, if the A output left unsocket is used, the
signal is mixed together with the B output. This
enables signal offsetting, CV mixing, pitch
transposing etc.
CONTENTS
In the Select 2 box, you’ll find:
Product card, stating serial number and
production batch.
16- - -to 10 pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
T he Select 2 module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.


Specyfikacje produktu

Marka: Joranalogue
Kategoria: nieskategoryzowany
Model: Select 2
Kolor produktu: Stal nierdzewna
Materiał obudowy: Stal
Wbudowany wyświetlacz: Tak
Położenie urządzenia: Wolnostojący
Częstotliwość wejściowa AC: 60 Hz
Napięcie wejściowe AC: 120 V
Wysokość produktu: 838 mm
Szerokość produktu: 457 mm
Głębokość produktu: 457 mm
Waga produktu: 28576 g
Kolor drzwiczek: Przezroczysty
Poziom hałasu: - dB
Certyfikaty: CSA & DOE
Zawias drzwiczek: Prawy
Roczne zużycie energii: 290 kWh
Pozycjonowanie na rynku: Mini bar
Dwustronne drzwi: Tak
Pojemność lodówki netto: 84 l
Światło wewnątrz lodówki: Tak
Liczba półek w lodówce: 3
Pojemność lodówki brutto: - l

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Joranalogue Select 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Joranalogue

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024