Instrukcja obsługi Joy-It PSG 9080
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Joy-It PSG 9080 (22 stron) w kategorii generator. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 3.7 gwiazdek
Strona 1/22
PSG 9080
Programmable signal generator
1. TABLE OF CONTENTS
1. General information
2. Safety instructions
3. Overview front and rear side
4. Function keys
5. Screen overview
6. Basic first steps
7. Modulation mode
8. Measuring mode
9. Sweep mode
10. Voltage Control Mode (VCO)
11. Programming mode
12. System settings
13. Troubleshooting
14. Additional information
15. Support
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
The PSG9080 function/arbitrary waveform generator can output basic
waveforms (sine wave, square wave, triangle wave, pulse wave and custom
waveforms) from one of the channels individually or both channels simul-
taneously. At start up, the two channels are configured to output a sine -
waveform with a frequency of 10kHz and an amplitude of 5Vpp by default.
Users can configure the unit to output dierent basic waveforms.
The PSG9080 has these functions: Amplitude, frequency, phase modulati-
on, amplitude shi keying, frequency shi keying, phase shi keying, pulse -
width modulation and burst function. It can measure the frequency, period
and length of input signals and count the periods. It also has a sampling
mode and a voltage control mode.
The button layout and 3.5" colour LCD are intuitive and easy to use. You
can save several settings in groups so you can load them quickly. The
menu can be set in German, English and French.
2. SAFETY INSTRUCTIONS
Please observe the following safety instructions before operating the unit
in order to avoid damage to the unit and the connected devices, as well
as injuries!
The unit is operated with a dangerous voltage,
Never open the casing when it is connected to the power supply.
There is a risk of electric shock!
To avoid short circuiting or electric shock, only use a suitable mains -
cable.
Prevent electrostatic discharges.
Do not supply power to the unit if any connections, wires
or components are exposed.
Do not operate if there is suspected failure or damage to the unit.
Do not operate the unit without covers or with screens removed.
Overvoltages, e.g. from a lightning strike, can damage the unit and cause
electric shocks.
Never use the unit in humid, very dusty environments or near open fire or
chemicals.
Operate the unit only at an ambient temperature between 10 °C and
50°C.
Make sure that the unit is suiciently ventilated during operation to avoid
overheating. Do not block the ventilation slots or insert any objects.
Check the unit when unpacking it for the first time and before operating
it. If there is any damage to the unit, please contact your supplier or us
directly.
Specyfikacje produktu
| Marka: | Joy-It |
| Kategoria: | generator |
| Model: | PSG 9080 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Joy-It PSG 9080, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje generator Joy-It
6 Października 2024
29 Września 2024
22 Września 2024
21 Września 2024
20 Września 2024
Instrukcje generator
- generator Cummins
- generator ITC Power
- generator Lifan
- generator Herkules
- generator ThermaSol
- generator Sunbird Solar
- generator Güde
- generator PowerPlus
- generator Voltcraft
- generator Load Up
- generator Draper
- generator DURO PRO
- generator AL-KO
- generator Kraftech
- generator Cleveland
Najnowsze instrukcje dla generator
27 Marca 2025
27 Marca 2025
27 Marca 2025
21 Lutego 2025
21 Lutego 2025
21 Lutego 2025
12 Lutego 2025
10 Lutego 2025
9 Lutego 2025
9 Lutego 2025