Instrukcja obs艂ugi JVC KY-PZ100BE

JVC Kamera monitoruj膮ca KY-PZ100BE

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla JVC KY-PZ100BE (125 stron) w kategorii Kamera monitoruj膮ca. Ta instrukcja by艂a pomocna dla 9 os贸b i zosta艂a oceniona przez 5 u偶ytkownik贸w na 艣rednio 4.3 gwiazdek

Pobierz PDF
Strona 1/125
JVC Camcorder Web API Reference
Version 1.17
JVC KENWOOD Corporation
Page 1
Conditions for the use of this document
Use of this document is permitted only if you agree to the following terms.
JVCKENWOOD CORPORATION SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. JVCKENWOOD
CORPORATION HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
MODIFICATIONS.
THIS DOCUMENT DESCRIBES APPLICATION PROGRAMMING INTERFACE TO CONTROL JVC CAMERA RECORDERS
VIA NETWORK, AND IT SHALL NOT BE USED FOR ANY OTHER PURPOSE.
Page 2
History
Version
Outline
1.00 First release
1.01 Added GY-HM660 to the command table
Added "3.1.15 Set streaming server settings(RTP)" command only GY-HM660.
1.02
Added "3.1.14 Set streaming server settings(RTP)" command for all cameras.
Type "TCP" is effective in "GY-HM650" and "GY-HM660" in command with a streaming type parameter.
Added "Variable Gain" parameter to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-LS300".
1.03
Type "TCP" is effective in "GY-HM650" in command with a streaming type parameter.
Type "UDPN" and "UDPL" are effective in "GY-HM660" in command with a streaming type parameter.
1.04 Supported KY-PZ100 newly.
Added "3.1.3 Set streaming framerate" command for "KY-PZ100".
Added "3.1.6 Available streaming framerate settings" command for "KY-PZ100".
Added "3.4. PTZ Camera Support Command" for "KY-PZ100".
Added "3.5. How to acquire JPEG data" for "KY-PZ100".
1.05 Added "3.1.3 Set streaming framerate" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.1.6 Available streaming framerate settings" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.5. How to acquire JPEG data" for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.6. How to use interruptible feedback function" for "GY-HM660".
1.06 Error correction. 2.1.1.
Another client is able to connect while first client is using API interface.
3.2.2 SessionRenewal command has become obsolete.
Added "3.6. How to use interruptible feedback function" for "GY-HM8x0".
Type "UDPN" and "UDPL" are effective in "GY-HM8x0" in command with a streaming type parameter
of "3.1.7 Available streaming bitrate settings" command.
1.07 Error correction. "3.1.10 Get streaming server settings".
Revised wrong parameters. They are effective to all models.
Error correction. "3.3.6. Set Web Button Event".
Some parameters are not supported on "KY-PZ100".
Added "MasterBlack" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event"
for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "Detail" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.4.3 Zoom switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.3.10 Seesaw switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added Gain event "Up1"/"Down1" parameters to "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added target models "GY-HM8x0", "GY-HM660", and "GY-HM200" to MenuStatus of "3.3.1 Get Camera Status"
Added "3.7. How to control tally system" description for "GY-HM8x0", "GY-HM660", "GY-HM200", and "KY-PZ100".
Changed ""3.3.5. Tally lamp control" description correspond to it.
1.08 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Added "3.2.6 Get NTP Status","3.2.7 Set NTP Server", and "3,2,8 Set NTP settings" Commands
for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Supported GY-HM25x newly.
Error correction.
Added "Whb" "Status" parameter to "3.3.1. Get camera status".
Changed "3.3.1. Get camera status". Parameter ("Enable" "Streaming" "On/Off") is not effective in "GY-HM200" and "GY-HM25x".
1.09 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM650".
Added "3.5. How to acquire JPEG data" for "GY-HM650".
Supported GY-HC900 newly.
1.10 for "GY-HC900" updates as below.
Added some resolution and bitrate parameters to "3.1. Streaming Setting Command".
Added "Smpte2022Fec" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTP)".
Added "AdaptiveBitrate" to "3.1.10. Get streaming server settings" and "3.1.14. Set streaming server settings(ZIXI)" .
Added "3.8. Return over IP Command" for "GY-HC900".
Added "Resolution" and "FrameRate" to "3.8.3. GetReturnOverIpServerSettings" and "3.8.4. SetReturnOverIpServerSettings(RTSP/Zixi)".
Added "3.8.3.1. AvailableTypeOfReturnOverIP" and "3.8.3.2. AvailableFrameRateOfReturnOverIP" commands.
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event".
Added "Position(Iris)" parameter "3.3.1. Get camera status".
Added "PCR Mode" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)" .
Added "Overlay" and "Tagging" parameter to 3.2.1. Get System Information.
Error correction. GY-HC900 does not support "Iris PushAuto" of "3.3.6 Set Web Event".
1.11 Supported GY-HC5x0 newly.
Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC5x0".
Added SRT parameter for "GY-HC5x0".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "PCR Mode" parameter to "3.1.10. Get streaming server settings"
and "3.1.16.Set streaming server settings(UDP/Zixi/RTP)" for GY-HC5x0.
Added "RTMPS" protocol for "GY-HC5x0".
"3.1.7. Available streaming bitrate settings" and "3.1.10. Get streaming server settings"
and "3.1.16. Set streaming server settings(RTMPS)".
1.12 Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC900".
Added SRT parameter for "GY-HC900".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "3.8. Return over IP Command" 30p/25p parameter for "GY-HC5x0".
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event" for "GY-HC5x0".
Added "Position(Iris)" parameter "3.3.1. Get camera status" for "GY-HC5x0".
Added "KA_EN200" parameter to 3.2.1. Get System Information for "GY-HC5x0" and "GY-HC900".
Added "422 60p" and "422 50p" parameters to each available streaming settings
for "GY-HC5x0" and "GY-HC900" when "KA-EN200" is enabled.
"3.1.1. Get streaming settings" and other available settings.
Added "EXT slot information" to "3.3.1. Get camera status" for "GY-HC900".
Page 3

Specyfikacje produktu

Marka: JVC
Kategoria: Kamera monitoruj膮ca
Model: KY-PZ100BE

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z JVC KY-PZ100BE, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮


Instrukcje Kamera monitoruj膮ca JVC

JVC

JVC TK-C925E Instrukcja

20 Wrze艣nia 2024
JVC

JVC TK-C750E Instrukcja

10 Wrze艣nia 2024
JVC

JVC TK-C920BE Instrukcja

8 Wrze艣nia 2024
JVC

JVC TK-C215V4E Instrukcja

7 Wrze艣nia 2024
JVC

JVC TK-T8101WPRU Instrukcja

7 Wrze艣nia 2024
JVC

JVC TK-C685WPE Instrukcja

6 Wrze艣nia 2024
JVC

JVC KY-PZ100BE Instrukcja

3 Wrze艣nia 2024
JVC

JVC TK-C2201WPE Instrukcja

2 Wrze艣nia 2024
JVC

JVC TK-C926EG Instrukcja

2 Wrze艣nia 2024
JVC

JVC VN-T16U Instrukcja

30 Sierpnia 2024

Instrukcje Kamera monitoruj膮ca

Najnowsze instrukcje dla Kamera monitoruj膮ca

Technaxx

Technaxx TX-192 Instrukcja

28 Stycznia 2025
Wisenet

Wisenet XNV-8080R Instrukcja

25 Stycznia 2025
Hombli

Hombli Smart Indoor Camera Instrukcja

17 Stycznia 2025
Dahua Technology

Dahua Technology Ultra IPC-HFW7442H-Z4 Instrukcja

17 Stycznia 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025