Instrukcja obsługi Kicker TRHDP
Kicker
system hi-fi
TRHDP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker TRHDP (1 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 42 osób i została oceniona przez 21.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
INSTRU CT I O N SHE ET
HARLEY DAVIDSON AUDIO PROGRAMMER
HARLEY DAVIDSON AUDIO PROGRAMMER
INCLUDED COMPONENTS:
QUESTIONS?
EMAIL:
(1) Programmer module
(1) USB Cable
(1) Diagnostic Connection Cable
(1) Download Instructions support@kicker.com
CALL:
(1)800.256.0808
ext. 6007
NOTE 1:
In order to utilize the Kicker Audio Module, the stock ECM MUST be used. For motorcycles with:
NOTE 2:
MUST BE CONNECTED TO THE INTERNET
Stock ECM: Follow the provided instructions with the Audio Module
Power Commander: Disconnect the Power Commander from the ECM circuit. Reconnect the ECM to the stock harness plug and then
follow the provided instructions with the Audio Module
Any Aftermarket ECM:
Disconnect your aftermarket ECM and install your stock ECM to the bike harness. Follow the provided
instructions with the Audio Module. (For some ECMs this will mean reinitializing the aftermarket ECM when it is reinstalled)
INSTALLING THE SOFTWARE FOR A FIRST TIME USER
1.
Download
software program from
http://technoresearch.com/index.php/support/
downloads
2.
Once the download completes,
Run
software installer
3.
Connect
yourKicker program module to your computer using
supplied USB cable
4.
From the Icon on your desktop
Start the Centurion
software
5.
Allow software to updat
1
e, accept terms and conditions
an select to launch ogram d language pr
PROGRAMMING LIKE A PRO
1.
Remove side cover from left side of bike and locate the
bottom 6 pin diagnostic plug
2.
Connect your programmer the bike
3.
Turn ignition switch to the Accessory position
4.
Launch program
5.
To connect to the bike, select the icon with two arrows
facing each other
6.
Once connected to the bike, select the icon with the
Wrench on it
7.
You a -will now see drop down menu. From this menu
you can read and reset DTC’s, and complete
programing for adding Kicker Audio upgrade kits.
2 SPEAKER FRONT KIT
If you are installing a 2 speaker/single amp kit complete the
following:
1.
Select Radio speaker programing
2.
Select 2 Speakers- Front Speaker Kit
3.
Select Program Speaker
a.
Follow onscreen directions, complete and look for Pass
on the menu
4.
Select from the drop-d o w n menu: Radio Front Rear amp
5.
Sel
ect
F
r
ont
and
Sta
r
5
t
a.
Click enable and flash
b.
Follow the onscreen directions (confirm Pass)
6.
Exit the program
4 SPEAKER FRONT AND REAR KIT
If you are installing both front and rear kits complete the
following:
1.
Select Radio speaker programing
2.
Select 4 Speakers- Front and Rear Speaker Kit
3.
Select Program Speaker
a.
Follow onscreen directions, complete and look for Pass
on the menu
4.
Select from the drop-d o w n menu: Radio Front Rear amp
5.
Select Front and Start
a.
Click enable and flash
b.
Follow the onscreen directions (confirm Pass)
6.
Repeat again for Rear Amp
7.
Exit the program
KICKER WWW . K I CKER.COM // 1/1
V3 4-2-18
Specyfikacje produktu
| Marka: | Kicker |
| Kategoria: | system hi-fi |
| Model: | TRHDP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kicker TRHDP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje system hi-fi Kicker
7 Października 2024
23 Września 2024
10 Września 2024
5 Września 2024
5 Września 2024
31 Sierpnia 2024
31 Sierpnia 2024
28 Sierpnia 2024
27 Sierpnia 2024
27 Sierpnia 2024
Instrukcje system hi-fi
- Ebode
- CE Labs
- Juke Audio
- Focusrite
- RCA
- Hyundai
- Anchor Audio
- Majority
- Wolfgang
- Metric Halo
- Krüger&Matz
- Magnavox
- Teac
- Mark Levinson
- ANT
Najnowsze instrukcje dla system hi-fi
9 Kwietnia 2025
5 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
28 Marca 2025
28 Marca 2025