Instrukcja obsługi Knog Bilby

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Knog Bilby (1 stron) w kategorii latarka. Ta instrukcja była pomocna dla 77 osób i została oceniona przez 2 użytkowników na średnio 4.4 gwiazdek

BUTTON 1BUTTON 2

EN

OPERATIONGET STARTED

WHEN LIGHT IS ONWHEN LIGHT IS OFF

CHARGING

ADJUSTABLE

HEADSTRAP

CHECKING BATTERY LEVELLOCK

Turn On: Long press of button 1

Turn O: Press and hold both buttons

Bilby comes locked

The silicone strap adjusts with a toggle. Once

you’ve found your size you can set and forget

or adjust on the fly

The reading lights show the battery level. When Bilby is

turned o, quick press any button.

MODES

Short press of button 1 to scroll through modes. The

light will slowly dim to extend runtime, if you wish to

go back to full output of your chosen mode press the

mode button once.

Modes: Spot, Wide, Low, Red, Reading

BOOST MODES

Double click either button to activate boost mode,

the Bilby will power up to maximum.

Button 1 - Spot and low (240 Lm)

Button 2- Spot and wide (400 Lm)

The light will slowly dim to extend runtime, to boost

to full output double click again.

BRIGHTNESS

Short press of button 2 to scroll through brightness

settings. Brightness: Max, High, Med, Low

TILT FUNCTION

Hold down the button 1 to tilt the light down.

Hold down the button 2 to tilt the light up.

LOW BATTERY

When the battery is low the light output with drop to

increase runtime.

MODEMAKER

The Bilby is compatible with the ModeMaker app to

allow customisation of the light modes. Open Mode-

Maker, plug the USB into your computer, drag and drop

the modes that you want and select upload.

CARE & MAINTENANCE

To clean: wipe with cloth, don’t use harsh

chemicals, air dry, don’t sun dry.

WARRANTY

The light is guaranteed for 2 years against

manufacturing defects only.

See the website for more details KNOG.COM

reading lights / battery indicator

Lights will flash while

charging showing the battery

level it has charged to. Four

flashing LEDs indicate it is

fully charged.

If you accidentally press any button when the Bilby is

locked the red light will flash twice.

To lock/unlock: Hold both buttons for 3 seconds. White

light will flash twice to show that Bilby is unlocked. Red

light will flash twice to show that Bilby is locked.

Fully charge the Bilby before the first use.

Pop out the inner pod to access the USB.

Then charge in any USB charge port.

Charge time: 4 hr.

25%

50%

75%

100%

SETTINGS OUTPUT

(LUMEN)

RUNTIME

(HOURS)

Boost Right High4005

Boost Right Low5060

Boost Left High9240

Boost Left Low8035

Ambient Right High20014

Ambient Right Low10525

Ambient Left High4822

Ambient Left Low798

Spot High20014

Spot Low10525

Red High732

Red Low2103

Reading High1017

Reading Low275

OPERATIONBUTTON 1BUTTON 2

Short PressChange ModeChange

Brightness

Long PressTilt Beam

Down

Tilt Beam

Up

Double PressBoost Mode 1Boost Mode 2

Press & Hold

both buttonsTurn O

OPERATIONBUTTON 1BUTTON 2

Short PressBattery

Charge Status

Battery

Charge Status

Long PressTurn Light

On -

Double Press--

Press & Hold

both buttonsLock/Unlock Light

To unlock hold both buttons for 3 seconds

QUICK START GUIDE

B I L BY

1. LOW 2. SPOT 3. WIDE 4. RED 5. READING

Pop out left

side of the

light first

(to avoid

damaging

the usb on

right side).

USB

1234

5

Specyfikacje produktu