Instrukcja obsługi Knog Qudos Action

Knog latarka Qudos Action

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Knog Qudos Action (2 stron) w kategorii latarka. Ta instrukcja była pomocna dla 60 osób i została oceniona przez 30.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/2

Includes:

English

Page 1 / 2

A. Light Unit

B. Rechargeable LiPo Battery 1

C. Action Camera Mount 2

D. Cold shoe + Tripod Adaptor 3

E. Mount Hardware (short)

F. Mount Hardware (long)

G. USB Extension Cord

H. 2 x Anti-Vibration Pads 4

Notes: 1 Rechargeable LiPo battery already assembled into the Light Unit. 2 Suitable for use with Go Pro Hero 2, Hero 2+, Hero 3 and Hero

3+ models or any action camera with a GoPro-style mount. 3 Cold shoe + Tripod Adaptor suitable for mounting onto a variety of Digital SLR

models and can also be used for mounting directly to a tripod. 4 Anti-vibration pads of varying heights have been provided for optional use and

assembly onto the Light Unit surface that is mounted closest to the Action Camera.

Before first use:

Please fully charge the battery before you use the [qudos] Action Light for the first time.

Modes of use:

The On/O switch is located on the top of the Light Unit. Press/hold for 2 seconds to turn it on and o. To switch between modes press the button

for 1 second or less.

Removing the Battery:

Battery removal and insertion should be carried out in a clean, dust-

free environment. Ensure your hands are clean. Should the area

around the seal become dirty whilst handling, the seal will become

compromised. Please refer to “waterproof seal care” section for

further details and to ensure your product warranty is not voided.

Mounting [qudos] Action Light:

There are a variety of mounting options and models that will enable

you to capture images and video at night.

Action Cameras:

Use parts C and E

DSLR Cameras:

Use parts D and E

Tripods:

Use parts D and E

Scuba Diving applications:

Using the standard Action cam mount whilst scuba diving may

produce undesirable ‘backscatter’. For a more desirable result, use of

a dedicated dive camera tray, placing the [qudos] Action light at least

30-50cm away from the Action Camera, is suggested.

1. Rotate tab, 2. Lift tab to release battery door, Open battery 3.

door, 4. Remove battery from Light Unit.

1. Connect battery to USB Extension cord provided.

2. Connect USB to a computer USB port or other electronic device

with USB port.

A full charge cycle will take 5-6 hours. Battery charge status LED

located at bottom of the battery.

Wall charger Specifications:

If using a wall charger, use an approved USB charger only. 90-260VAC 50/60Hz. 5VDC (+0.25V/-0.1V) 2A.AC input: DC Output:

Use chargers with suitable approvals and certifications only. Indoors only in temperatures above 10°C (50°F).Charging conditions:

Note: Repeat steps in reverse to replace battery in Light Unit.

Recharging the Battery:

A B C D E HF G

Beam Angle

Wide

Narrow

Ultra wide

Mode

Action

Target Spot

Ambient

Lumens

400 High / 225 Low

175 High / 100 Low

270 High / 70 Low

Runtime (hrs)

0.7 High / 1.3 Low

1.5 High / 2.8 Low

1.1 High / 4.3 Low

Icon

12 3 4

LED

Specyfikacje produktu

Marka:	Knog
Kategoria:	latarka
Model:	Qudos Action
Kolor produktu:	Srebrny
Materiał obudowy:	Aluminium
Wysokość produktu:	40 mm
Szerokość produktu:	31 mm
Głębokość produktu:	70 mm
Waga produktu:	150 g
Czas ładowania:	5 h
Pojemność baterii:	1000 mAh
Technologia baterii:	Litowo-polimerowy (LiPo)
Typ lamp:	LED
Ilość lamp:	3 lamp(y)
Lampy:	- W
Stopień ochrony IP:	IP68
Wodoodporny:	Tak
Kompatybilność marki:	GoPro
Wskaźnik poziomu baterii:	Tak
Zasilane prze USB:	Tak
Typ diody LED:	XB-D CREE
Obsługiwane produkty:	Knog Qudos Action
Strumień świetlny:	400 lm
Wodoodporny do:	60 m