Instrukcja obsługi Kramer KT-107-INWL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kramer KT-107-INWL (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 8 użytkowników na średnio 4.2 gwiazdek

KT--INWL 107 Quick Start

P/N:

2900-301151QS

Rev:

2

Scan for full manual

KT--INWL Quick Start Guide 107

This guide helps you install and use your KT-107-INWLfor the rst time.

Go to www.kramerav.com/downloads/KT--INWL107to download the latest manual and check for updates.

Step 1: Check what’s in the box

KT--INWL 107enclosure

4 4x1/2” screws for wood (packed separately)

Outer frame

1 utCardboard c-out template

4 Inner frame M3x8 screws (packed separately

Inner frame

1 Quick start guide

Step 2: Get to know your --INWL KT107

The -Wall Kit secures ,and Touch Panels safely into a wall (drywall, wood, or KT--INWL107InKT-107 -107RB KT -107SKT

concrete).

Step 3: Prepare the surface for installation

For drywall and wooden surfaces:

1. Place the cut-out template (included, use

for drywall and wood installations) over the

surface exactly where you want to install

KT--INWL107.

2. Mark the edge inside

(W, H: 19.5cm x 15cm) of the template and

cut an opening in the surface according to

the given dimensions.

Kramer is not responsible for any

damage caused to the surface.

For concrete or block wall surfaces:

Use the Kramer -wall box KT-107-INWBin

(purchased separately) for concrete

installations.

1. Make sure that the prepared opening in

the concrete ts the dimensions of the in-

wall junction box.

2. Insert the into the opening. KT--INWB107

Make sure to place the ush KT-107-INWB

with the plaster surface.

Specyfikacje produktu