Instrukcja obsługi Lancom 1790EF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lancom 1790EF (2 stron) w kategorii router. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 3 użytkowników na średnio 4.2 gwiazdek

Hardware

Power supply12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against

disconnection

Power consumptionMax. ca. 11 W

EnvironmentTemperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing

HousingRobust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; mea-

sures 210 x 45 x 140 mm (W x H x D)

Number of fansNone; fanless design, no rotating parts, high MTBF

Interfaces

WAN10 / 100 / 1000 Mbps Gigabit Ethernet

ETH4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch ex-factory.

Up to 3 ports can be switched as additional WAN ports.

USBUSB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices

(COM-port servers), USB data media (FAT file system), or supported UMTS USB modems

SFPSocket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC).

Compatible with optional LANCOM SFP modules for optical connections over short distances

(SX) or longer distances (LX). Set as a LAN port ex-factory, can be configured as a WAN port

Serial InterfaceSerial configuration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for

optional connection of analog/GPRS modems. Supports internal COM-port server and provides

transparent asynchronous serial data transmission via TCP

WAN protocols

EthernetPPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,

RIP-2, VLAN, IP

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package content

DocumentationHardware Quick Reference Guide (DE/EN); Installation Guide (DE/EN)

Cable2 Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green connector)

Power adapterExternal power supply adapter (230 V) 12 V / 2 A DC/S; barrel / bayonet (EU),

LANCOM item no. 111303 (not for WW devices)

This product contains separate open-source software components which are subject to their own licenses, in particular

the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s

WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the

corresponding software components will be made available on a download server upon request.

aPower

OffDevice switched off

Green, permanently*Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Red/green, blinkingConfiguration password not set. Without a

configuration password, the configuration

data in the device is unprotected.

Red, blinkingHardware error

Red, blinking slowlyTime or charge limit reached/error message

occurred

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

bOnline

OffWAN connection inactive

Green, blinkingWAN connection is established

(e.g. PPP negotiation)

Green, permanentlyWAN connection active

Red, permanentlyWAN connection error

cSFP

OffSFP deactivated in the configuration

or SFP module present, no connection to

network device

Red, permanentlySFP enabled in the configuration but no

SFP module present

Green, permanentlySFP module present, connection to

network exists, no data transmission

Green, blinkingData transmission

Red, blinkingSFP module present, hardware error

fVPN

OffNo VPN connection active

Green, permanentlyVPN connection active

Green, blinkingEstablishing VPN connection

eETH

OffNo link

Green, permanentlyNetwork connection ready (link)

Green, flickeringData transmission

dWAN

OffInterface deactivated

Orange, blinkingSynchronization with the modem

Orange, permanentlySynchronization with the modem

successful

Green, permanentlyWAN connection established

Green, flickeringWAN data transmission

Red/orange, blinkingHardware error, ext. modem

TECHNICAL DETAILS

MOUNTING AND CONNECTING THE DEVICE

LANCOM 1790EF

WAN

SFP

ETH 2

Power

ETH 1

Online

ETH 4

ETH 3

VPN

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is configured to be managed by the LANCOM

Management Cloud.

ac defb

LANCOM 1790EF

Quick Reference Guide

C ud eadylo-r

acdef gb

aSFP interface

Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)

into the SFP port. Choose a cable compatible with the SFP module

and connect it as described in the module’s documentation. SFP

modulel and cable are not included.

bWAN interface

Use the cable with the green connectors to connect the WAN

interface to your WAN modem..

cEthernet interfaces

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

dConfiguration interface

Use a serial configuration cable to connect the serial interface

(COM) to the serial interface of the device you want to use for

configuring / monitoring (separately available).

eUSB interface

Connect a USB data medium or a USB printer to the USB

interface. (USB cable not supplied)

fReset button

Pressed up to 5 seconds: device restart

Pressed until first flashing up of all LEDs:

configuration reset and device restart

gPower

After connecting the cable to the device, turn the bayonet

connector 90° clockwise until it clicks into place.

Use only the supplied power adapter.

4

Please observe the following when setting up the device

ADo not rest any objects on top of the device

AFor devices to be operated on the desktop, please attach the

adhesive rubber footpads

AIn case of wall mounting, use the drilling template as supplied

AKeep the ventilation slots on the side of the device clear

of obstruction

ARack installation with the optional LANCOM Rack Mount

(separately available)

LANCOM 1681V

Power

VDSL

Onl ine

ETH 1

VPN

TH 3

ETH 4

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document

contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111809/01/22

Specyfikacje produktu