Instrukcja obsługi LiftMaster 970LM

LiftMaster Niesklasyfikowane 970LM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LiftMaster 970LM (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF

Strona 1/5

Single Button Remote Control 3-Button Remote Control Mini-Remote Control

SECURITY+® REMOTE CONTROLS

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play

with remote controls.

• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no

obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross

path of moving gate or door.

Press and hold the button

on the remote control

that you wish to operate

your door.

“click”

Release the

button when the

garage door

opener lights

blink or two

clicks are heard.

Locate the

Smart/Learn

button on

the garage

..renepo rood

Press and

immediately release

the learn button.

The learn LED will glow

steadily for 30 seconds.

Within 30 seconds...

PROGRAMMING THE REMOTE CONTROL

Press and hold the learn button

on garage door opener until the

learn LED goes out (approximately

6 seconds). All previous codes

are now erased.

For use with 390 MHz Security+® garage door openers and light controls that have an learn orange

button. The code between the remote control and the receiver changes with each use, randomly

accessing over a billion new codes.

NOTE: Your products may look different than the products illustrated in this manual.

TO CONTROL THE GARAGE DOOR OPENER LIGHTS

With the door closed,

press and hold

the remote

control button

that you want to

control the light.

LIG

Press and

hold the

light button

on the

door control.

LIG T

Press and

hold the

lock button

on the

door control.

After the garage

door opener

lights ﬂash,

release all

buttons.

2 3

“click”

This feature is only available on garage door openers equipped with a multi-function door control and a remote control with more than one button. Not available with universal receiver.

With Security+

® remote controls, a remote control button can be programmed to operate the garage door opener lights without opening the door.

Reprogram each remote control you wish to use.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

TO ERASE ALL CODES FROM MEMORY

To deactivate any unwanted remote control, first erase all codes: