Instrukcja obsługi Linksys LGS108P
Linksys
nieskategoryzowany
LGS108P
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Linksys LGS108P (3 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.3 gwiazdek
Strona 1/3

TABLE OF CONTENTS
1. What is the Linksys LGS108P Switch?
2. What is PoE?
3. What kind of devices can be connected to the switch?
4. What should I do when my computer cannot connect to the Internet while connected to the switch?
5. What is the advantage of having a switch when it comes to data transfer?
6. What is the maximum PoE power budget for each PoE switch?
7. What are the protocols supported by the LGS108P?
8. Can I wall-mount my switch?
9. What should I do if my switch experiences excessive data collisions?
10. Is my switch capable of Jumbo Frame Support?
11. Can I use a switch to share Internet connection to all computers in the network?
12. Which ports on my PoE switch can I plug in a PoE device?
13. How is port PoE prioritization done?
14. What is the warranty period for the Linksys LGS108P?
15. What are the supported PoE standards?
16. My PoE device is not powering ON, what should I do?
_____________________________________________________________________________________________________________________________
1. What is the Linksys LGS108P Switch?
The is a 8-Port Gigabit PoE Switch. This unmanaged switch offers a quick and easy solution to extend your office networkLinksys LGS108P
with a plug-and-play installation. It is also useful in transferring data across a local network at up to Gigabit speeds.
2. What is PoE?
Power over Ethernet (PoE) is a technology that enables an Ethernet network cable to deliver both data and power.
3. What kind of devices can be connected to the switch?
You can connect the following devices to your LGS108P switch:
Computers
Routers
Switches
Network Printers
Other network devices
4. What should I do when my computer cannot connect to the Internet while connected to the switch?
Follow the steps provided below to resolve this issue:
Verify if LEDs are properly lit on the switch.
System LED - Blue
Link/Act/GB - Green (1000 Mbps)-Amber (10/100 Mbps)
PoE Max - Amber
PoE - Green
Power down all devices and power ON the switch first. Next, power ON the computer.
NOTE: DHCP capabilities Only routers or modems with can allow sharing of Internet connection between computers.
5. What is the advantage of having a switch when it comes to data transfer?
The switch acts as a repeater which regenerates data signals as they pass through it. This feature acts as a safeguard to deter data loss and
ensure that transmissions arrive securely at their destinations. Moreover, a switch is capable of intelligent filtering of data based on source and
destination as compared to the repeater which can only regenerate the signal without checking its recipients.
6. What is the maximum PoE power budget for each PoE switch?
The Linksys LGS108P has dedicated PoE power budget for the entire switch. 50 W
7. What are the protocols supported by the LGS108P?
LGS108P Frequently Asked Questions
Specyfikacje produktu
| Marka: | Linksys |
| Kategoria: | nieskategoryzowany |
| Model: | LGS108P |
| Kolor produktu: | Czarny |
| Wysokość produktu: | 25 mm |
| Szerokość produktu: | 210 mm |
| Głębokość produktu: | 104 mm |
| Waga produktu: | 556 g |
| Podręcznik użytkownika: | Tak |
| Certyfikaty: | FCC Class A, CE |
| Standardy komunikacyjne: | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Obsługa PoE: | Tak |
| Zakres temperatur (eksploatacja): | 0 - 50 °C |
| Zakres wilgotności względnej: | 10 - 90 % |
| Skrócona instrukcja obsługi: | Tak |
| Pobór mocy: | 7 W |
| Napięcie: | 54 V |
| Diody LED: | Activity, Link, PoE |
| Zakres temperatur (przechowywanie): | -40 - 70 °C |
| Dopuszczalna wilgotność względna: | 10 - 90 % |
| Obsługa jakość serwisu (QoS): | Tak |
| Prąd wejściowy: | 1.2 A |
| Podstawowe przełączanie RJ-45 Liczba portów Ethernet: | 8 |
| Podstawowe przełączania Ethernet RJ-45 porty typ: | Gigabit Ethernet (10/100/1000) |
| Wielkość tabeli adresów: | 8000 wejścia |
| Przepustowość rutowania/przełączania: | - Gbit/s |
| Całkowita Power over Ethernet (PoE) budżetu: | 50 W |
| Technologia okablowania Copper Ethernet: | 1000BASE-T, 100BASE-T, 10BASE-T |
| Ilość portów Fast Ethernet (PoE): | 4 |
| Power over Ethernet Plus (PoE +) ilość portów: | 4 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Linksys LGS108P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Linksys
25 Maja 2024
Instrukcje nieskategoryzowany
- Sogo
- Yamaha
- Patriot
- Lenco
- Harley Benton
- Traeger
- BLUEPALM
- Genesis
- Technika
- Ferguson
- OneConcept
- Mercury
- ZTE
- E-ast
- Dangerous Music
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024