Instrukcja obsługi Lowell RPC-15-S


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lowell RPC-15-S (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.1 gwiazdek

Strona 1/2
INTERNAL USE ONLY: PN 24319
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2023 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069, USA / tel. 800.325.9660 / tel. 636-257-3400 / www.lowellmfg.com
Spec 2041
Model RPC-15-S | Rev. 1-10-2023 | pg. 1/2
REMOTE POWER CONTROLS can be combined with a variety of switches or sequencers for an intrinsically
safe, low voltage method of controlling AC power to equipment at remote locations. Controlling power
distribution without directly accessing equipment minimizes the potential for unauthorized access, while
simplifying activation and deactivation of equipment.
INSTALLATION: The RPC is typically installed near
the equipment to be controlled. Low voltage cable
is run from its terminal strip to a control switch (or
other control method).
Systems can be configured with multiple RPCs
controlled by a single "Maintained Closure"
switch.
Systems can also be configured with a single
RPC controlled by multiple "Momentary Clo-
sure" switches and Lowell's MSM2 module
(which converts momentary closure to main-
tained).
COMPATIBLE DEVICES: (order separately)
SPST Switch (RPS Series): Low voltage wall-
mount or rack-mount switch:
Switch with maintained closure connects
directly to RPC.
Switch with momentary closure requires Low-
ell conversion module MSM2 placed between
the switch and RPC.
Power Sequencer (SEQ Series): A low volt-
age sequencer can be used with the RPC
for time-delayed activation and deactivation
of connected equipment. Lowell standalone
sequencers will require a switch for activation,
while Lowell rack-mount sequencers include a
switch. See product spec sheets for information.
Ideal for Lowell switches featuring main-
tained closure (order separately):
RPSB-P Black wall plate w/rocker switch
RPSW-P White wall plate w/rocker switch
RPSW-KP White wall plate w/key switch
RPSB-R Rack panel w/rocker switch
RPSB-KR Rack panel w/key switch
Certied
US Steel
Made In USA
with Global
Components
Model No.
RPC-15-S
Remote Power Control
actives remote equipment external trigger required
FEATURES
CHASSIS: Steel chassis with black finish and
mounting holes.
Overall Dimensions:
8.00"L x 3.25"W x 1.95"H
POWER:
Power Rating: 125VAC 60Hz 15A
Outlets: NEMA 5-15R duplex
Attached Cord: 6 ft. with NEMA 5-15P plug
SURGE PROTECTION:
Maximum Surge Current: 20,000A
VPR: 400V
Response Time: 1 nanosecond
EMI/RFI Noise Reduction: 20dB@100kHz
Protection Mode: Line to Neutral
Ground Contamination: None
ACTIVATION: Must be connected to an external
control to trigger activation and deactivation:
Dry Contact Closure: Connect to SPST switch,
power sequencer, or independent control sys-
tem with dry contact closure.
: Contact Coil Rating
- Voltage: 24VDC
- Current: 37.5mA
ORIGIN: Made in the U.S.A. with global components
THIRD PARTY APPROVAL: ETL Listed to
UL60065 (U.S. and Canada)
A&E SPECIFICATIONS
The device for remotely controlling AC power shall be Lowell model RPC-15-S, which shall feature a steel
chassis with black powder epoxynish, 125VAC 60Hz 15A power rating, NEMA 5-15R duplex outlet, 6 ft.
cord with NEMA 5-15P plug, and basic surge protection up to 20,000A. The overall dimensions shall be
8.00"L x 3.25"W x 1.95"H. The unit shall require an external trigger for activation (not included).


Specyfikacje produktu

Marka: Lowell
Kategoria: Niesklasyfikowane
Model: RPC-15-S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lowell RPC-15-S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Lowell

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025