Instrukcja obsługi Martin ELP Zoom Lens

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin ELP Zoom Lens (1 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek

ELP ZOOM LENS

Installation and Safety Manual

Installation

1.Rotate zoom lens (1) 45 degrees from home position and connect to the ELP body*

2.Rotate zoom lens (2)backto secure to the ELP body into home position.

3.Tighten the screws (3) and (4) to lock into position.

4.Tighten screws (5) at both sides to prevent sideways. movement

*Home position is identified by the Martin logo positioned on the side of the zoom lens as shown in the diagram above

Securing with a safety cable

Secure the fixture with a safety cable (or other secondary attachment) that is approved for the

weight of the fixture so that the safety cable will hold the fixture if the primary attachment fails.

Loop the safety cable through the attachment eye at the rear of the fixture and at the front of

the lens tube (see illustration below) around a secure anchoring point.

If a safety cable attachment point becomes damaged or deformed, do not use the fixture.

Return it to a Martin Service Centre for repair.

Specyfikacje produktu